Analysis and measurements 366 pH-metry h The tablet hVery thin: 13 mm thick hUltra-light: 250 g hGlass front panel: can be used with gloves, glass protects the front of the tablet hLCD display: 5.5 inch (14 cm), excellent readability, all displays in text messages hCapacitive keypad h2 USB ports (1 USB for memory stick, 1 mini-USB to PC) hRechargeable via mains and USB h3.5 mm jack: robust, 'break-proof' connection hErgonomics: zero clutter, can be used in hand, on the bench or wall-mounted (bracket and wall-mount supplied with the kits) h Features hMeasurements: pH, conductivity or oximetry hConfigurations, calibrations, diagnostics hInternal memory (1000 measurements) or data transfer (PC or USB stick) hBasic mode: ideal for routine measurements, with a simplified display hExpert mode: for full instrument setup hGLP compliance: storage of the last calibration data in the digital probe (when connected to the EDGE tablet, this information is transferred automatically) hAutomatic recognition of digital probes when connected hCAL-Check function: checks that the calibration procedures are carried out correctly. (Only for pH measurements) hSensor Check function (HI 12301 and HI11311 digital pH probes only): monitoring of electrode impedance, detecting any related malfunction hMulti-parameter models accept all digital probes PH Kit EC kit (conductivity) DO kit (oximetry) Contains - HI 11310 Digital pH electrode, refillable, glass body with a built-in temperature sensor. - Buffer solution sachets (pH 4, 7 and 10): 2 of each) - Cleaning solution for electrodes - Quality certificate - HI 76310 conductivity probe with a built-in temperature sensor - Calibration solution sachets (1413 µS/cm and 12880 µS/cm, 3 each) - Quality certificate - HI 764080 Dissolved Oxygen probe with a built-in temperature sensor - HI 7041S electrolyte solution - 2 membranes and 2 seals for dissolved oxygen probe - Quality certificate Range - Basic mode: - 2.00 to 16.00 pH - Standard mode: - 2.000 to 16.000 pH ± 1000.0 From 0.00 µS/cm to 500 mS/cm (absolute conductivity) - TDS and salinity - 0.00 to 45.00 mg/l (ppm) - 0.0 to 300% oxygen saturation Resolution 0.01 pH; 0.001 pH; 0.1 mV * Download the full brochure at www.dulis.nl for all information 0.01 mg/l (ppm); 0.1% saturation Accuracy (at 25 °C) ± 0.01 pH; ± 0.002 pH; ± 0.2 mV 1.5% of reading ± 1 digit Calibration - Basic mode: in 3-point; standard mode: in 5-point - 7 standard buffers stored + 2 user-defined specific buffers* - Calibration to 0 (in air) and cell constant factor - 6 standards to choose from - In 1 or 2 points at 0% (with HI 7040 solution) and 100% (in air) Temperature compensation Automatic from - 20.0 °C to 120.0 °C Automatic from -20.0 °C to 120.0 °C (Can be switched off for absolute conductivity measurement) Automatic from 0 °C to 50 °C Cat. No. 523674** 054503*** 523703** 054504*** 523704** 054505*** € N/A - N/A - N/A - N/A - N/A - N/A - ** Single-parameter *** Multiparameters Measure pH, conductivity or dissolved oxygen with the EDGE tablet and its smart digital probe kits! Cat.No Measures Model Body Filling Junction Temperature sensor Entrance** differential € 054506 pH HI 11310 Glass Yes Double Integrated No N/A - 054507 pH HI 11311 Glass Yes Double Integrated Yes N/A - 054508 pH HI 12300 Plastic Gel Double Integrated No N/A - 054509 pH HI 12301 Plastic Gel Double Integrated Yes N/A - 054510 pH HI 10530 Glass Yes Simple Integrated No N/A - 054511 pH HI 10430 Glass Yes Double Without No N/A - 054512 Conductivity HI 763100 - - - Integrated No N/A - 054513 Oximetry HI 764080 - - - Integrated No N/A - **The differential input is specific to the Sensor Check function. EDGE is available in 3 kits: pH, EC or DO. Each kit contains: h The EDGE tablet h Docking and charging station, with electrode holder h Wall bracket h USB cable h 5V power adapter h Operating guide h + the specific contents of each kit (see below) Additional digital electrodes/probes The following digital probes, including those included in the kits, are the only ones compatible with the EDGE pH meter. Supplied with a 1 m cable. Wall bracket USB cable 5V power adapter Docking and charging station, with electrode holder hanna EDGE single or multiparameter pH meter Download the full EDGE datasheets at www.dulis.nl for full probe information and more technical data. WEB Single-parameter Mulitparameters
RkJQdWJsaXNoZXIy MTUwNzIy