1010 Filtration Delivered without erlen filter holders / filter systems and holders Chemical compatibility See that of materials Filtration area 12.5 cm2 Weight 83 g Tip M12 x 1 Material Body (top and bottom) in PC PC connector tips PP filter support grid Silicone O-ring gasket (40x5mm) Max. pressure: 7 bar / 700 kPa / 101.5 psi ø filter required 50 mm (prefilter 40 mm) Sterilization Autoclaving at 121 °C * Cat. No. 150458 €/ 5 units N/A - 150458 Additional spare parts Cat. No. Description € 150459 M12x1 polycarbonate connector N/A - 150460 Polypropylene grid for filter holder (2 units) N/A - 150461 Silicone O-ring gasket (40 x 5 mm) N/A - 150462 Polycarbonate base N/A - For laboratory filtrations. Made of chemically stable and autoclavable polycarbonate. Can be connected to a peristaltic pump or a pressure tank. * The material can withstand repeated autoclaving cycles, provided that any chemically aggressive substances have been thoroughly cleaned beforehand, and that the boiler water does not contain any anti-corrosive or anti-scaling additives. hMade of glass, fully autoclavable hSuitable for membrane Ø 47 mm hIdeal for microbiology Includes 4 items: • 300 ml funnel; • support base with sintered disc and vacuum connector; • metal retaining clip; • 1000 ml conical flask suitable for use under vacuum. Cat. No. Description € 001967 Graduated glass funnel 300 ml N/A - 001968 Base and vacuum connector N/A - 001969 Glass conical flask 1000 ml N/A - 001970 Metal retaining clip N/A - 001966 Complete system including the 4 components N/A - Supplied with: • 1000 ml vacuum flask, with NS45/40; • NS 45/40 head with connection for GL14 hose; • pTFE adapter disc; • glass filter disc, 50 mm in diameter; • slit-sieve Büchner disc, 48 mm in diameter; • funnel with 250 ml scale; • anodised aluminium clamp; • plastic hose connection, straight in PP with silicone gasket, GL14 • screw cap in red PBT GL14. Cat. No. Description € 090986 Complete Filtration unit with PTFE adapter disc and clamp N/A - Cat. No. Description € 084486 DURAN PTFE adapter for filtration on GL45 bottles N/A - 001966 Complete system Adapter hPTFE adapter for direct filtering onto a GL45 neck bottle hConnection between NS 45/40 ground neck and GL45 threaded neck hFor use with pressure-resistant bottles (see page 1034) PTFE filtration adapter 50 mm polycarbonate filter holder Complete Pyrex Scilabware filtration system Complete filtration system made of Schott DURAN borosilicate glass Borosilicate glass Funnels. hFor Membranes of 25 mm or 47 mm diameter hWith sintered glass disc hTo be completed with silicone caps, clamps and filter vials Cat. No. 046481 15 25 N/A - 046482 100 25 N/A - 046483 250 47 N/A - Capacity (ml) Membrane ø (mm) € Filter funnels Cat. No. 046484 Silicone cap for funnel 15 ml and 100 ml N/A - 046485 Silicone cap for funnel 250 ml N/A - Description € Silicone caps Cat. No. 046486 Clamp for funnel 15 ml et 100 ml N/A - 046487 Clamp for funnel 250 ml N/A - Description € Clamps Filter funnels
RkJQdWJsaXNoZXIy MTUwNzIy