Glassware

een uitzonderlijk avontuur DULIS bv - Nederland Marten Meesweg 25-G - 3068 AV Rotterdam www.dulis.nl I + 31 10-899 13 61 I info@dulis.nl

GLASSWARE • DURAN® and Pyrex® Bottles 1032 to 1037 • Borosilicate glass bottles 1038 and 1039 • Soda-lime glass bottles 1040 to 1042 • Caps 1043 à 1050 • Soda-lime glass bottles with ground glass neck 1051 • Dropper and spray bottles 1052 and 1053 • Scintillation vials 1054 and 1055 • Sample flasks 1056 to 1066 • Caps for sample flasks 1067 to 1069 • Crimpers and bottle openers 1070 • Test tubes 1071 to 1076 • Centrifuge tubes 1076 and 1077 • Hybridization tubes 1077 • Beakers 1078 to 1080 • Measuring cylinders 1081 to 1083 • Erlenmeyer 1084 to 1088 • Culture flasks 1089 • Volumetric flasks, caps 1089 to 1093 • Funnels 1093 and 1094 • Round Flasks 1095 • Petri dishes 1096 and 1097 • Crystallizers, mortars and pestles 1097 and 1098 • Dessicators 1099 • Chromatography flasks 1100 to 1103 • RMN Tubes 1103 and 1104 • Glass Accessories 1105 and 1106 An extraordinary adventure

Glassware 1031 All prices are indicative and exclude VAT. Visit www.dulis.nl General information hBefore handling, make sure the product is in good condition (not scratched, cracked or damaged) hAny defect can change the characteristics of the glass and lead to breakage hUse a suitable plug (correct diameter), never push it in too hard hAlways support large containers from below Heating hBorosilicate glass can be placed in the microwave hWhen using a hot plate make sure the plate is larger than the base of the container to be heated hNever place glassware on an already hot surface, always heat gradually starting at room temperature Glassware in the laboratory hAlso called standard glass, chemical glass or white glass hGood chemical and physical properties hComposed of approximately 70% silica, 13% soda, 12% limestone hHigh coefficient of expansion, sensitive to heat variations hNot autoclavable hBetter flow, larger pores and better viscosity for clean meniscus formation, ideal for volumetry hUse: products that have to withstand short chemical stress and are not subject to thermal stress The different types of glass Soda-lime glass hAlso called borosilicate glass 3.3 hVery good chemical and physical properties hConsists of approximately 80% silica, 13% boron oxide, 4% soda ash hLow coefficient of expansion, very high resistance to heat and temperature changes hUse: applications requiring very good chemical resistance, heat resistance, thermal shock resistance and high mechanical stability; used in the chemical and pharmaceutical industries and in research laboratories Borosilicate glass hBorosilicate glass 3.3 hEP and USP compliant for borosilicate glass type I for the pharmaceutical industry hComplies with ISO 3585 hExceptionally consistent and reproducible quality hRegular thickness hImproved mechanical stability and resistance to temperature changes hIncreased safety in use, longer product life and reduced overall costs hTraceability code: eight-digit number used as a traceability code to access all important production data hBatch certificates hUse: storage, sample preparation, transport DURAN® Glass hBorosilicate glass 3.3 hEP and USP compliant for borosilicate glass type I for the pharmaceutical industry hComplies with ISO 3585 hExcellent thermal properties at both high and low temperatures hRegular thickness hBatch number, an eight-digit code printed on the glass, for traceability of information from production hBatch certificates hUse: storage, sample preparation, transport PYREX® Glass Maintenance and use ››› The following are general recommendations for the care and use of glassware in the laboratory. ››› Correct handling optimises the performance and preservation of your glassware Cleaning hWash glassware before first use hClean the glassware immediately after use to avoid solidification of residues hUse a mild or non-abrasive detergent and a soft, flexible brush or sponge hAll glassware can also be cleaned in the dishwasher Sterilization hBefore any sterilisation, the glassware must be thoroughly cleaned hIt is recommended to use a 20 minute cycle at 121 °C and 1 bar hAlways unscrew the caps of bottles or tubes before autoclaving. Any material obstructing the opening may cause deformation or destruction of the plastic Use under vacuum and pressure hUse only glassware recommended specifically for vacuum and pressure applications hNever subject glassware to sudden changes in pressure hAlways apply and release pressure and vacuum gradually Recycling and disposal hSoda-lime glass can be softened and remelted many times, and is perfectly suitable for recycling, in the same way as household glass, after any necessary decontamination procedures hBorosilicate glass should be disposed of with household waste provided that the glass is not chemically contaminated hDispose of glass in a dedicated, puncture-resistant waste bin

Glassware 1032 DURAN® and Pyrex® Bottles The originals Clear glass bottles Brown bottles Volume (ml) Height with cap (mm) Height without cap (mm) Neck Ø (GL Thread) Body Ø (mm) Units/ box Without cap €/ box With blue PP cap €/ box Without cap €/ box With blue PP cap €/ box 10 54 50 GL 25 36 10 090982 N/A - 090983 N/A - 090985 N/A - 090987 N/A - 25 74 70 GL 25 36 10 090969 N/A - 090299 N/A - 090392 N/A - 083836 N/A - 50 91 87 GL 32 46 10 090970 N/A - 090300 N/A - 090393 N/A - 083838 N/A - 100 105 100 GL 45 56 10 090382 N/A - 090301 N/A - 090394 N/A - 083840 N/A - 150 115 110 GL 45 62 10 092036 N/A - 092033 N/A - 092039 N/A - 083841 N/A - 250 143 138 GL 45 70 10 090383 N/A - 090302 N/A - 090395 N/A - 083843 N/A - 500 181 176 GL 45 86 10 090379 N/A - 090303 N/A - 090396 N/A - 083845 N/A - 750 208 203 GL 45 95 10 092037 N/A - 092034 N/A - 092040 N/A - 083846 N/A - 1000 230 225 GL 45 101 10 090384 N/A - 090304 N/A - 090397 N/A - 083848 N/A - 2000 265 260 GL 45 136 10 090971 N/A - 090305 N/A - 090398 N/A - 083850 N/A - 3500 300 295 GL 45 160 1 092038 N/A - 092035 N/A - 092041 N/A - 083851 N/A - 5000 335 330 GL 45 182 1 090972 N/A - 090306 N/A - 090399 N/A - 083853 N/A - 10000 415 410 GL 45 227 1 090973 N/A - 090307 N/A - 090800 N/A - 083854 N/A - 20000 510 505 GL 45 288 1 090975 N/A - 090308 N/A - 083856 N/A - - - 25000 545 - GL 45 316 1 - - 096063 N/A - - - - - DURAN® borosilicate glass bottles are characterised by a very low coefficient of expansion and excellent resistance to thermal shock and chemicals. hDuran® type I clear or amber glass hWith or without polypropylene screw cap with pouring ring hUniform wall thickness hAutoclavable, sterilisable hWith traceability code to obtain a batch certificate on the internet hLong-lasting printed graduations Certificate and batch tracking for DURAN® bottles with GL45: using the 8-digit special code written on the bottle, possibility of obtaining a certificate directly on the Internet. Duran® Borosilicate glass bottles hISO borosilicate glass bottles hAutoclavable hIdeal for storage and preservation of culture media and buffers hGraduated, with blue polypropylene cap and pouring ring (except GL25, which is supplied without pouring ring) hTraceability code Capped bottles Rings and caps Neck type GL 25 GL 32 GL 45 Pouring ring, PP, white - 001100 001101 €/ 10 units - N/A - N/A - Pouring ring, ETFE, red - 001104 001105 €/ 10 units - N/A - N/A - Screw cap, PP, blue 001108 001102 001103 €/ 10 units N/A - N/A - N/A - Screw cap, ETFE, red 001109 001106 001107 €/ 10 units N/A - N/A - N/A - Pyrex® Media Flasks Enter the reference on dulis.nl to find the the procedure for processing laboratory glassware. WEB Cat. No. Volume (ml) Neck ø x H (mm) Units/ box €/ box 001090 25 GL 25 36 x 70 10 N/A - 001091 50 GL 32 46 x 88 10 N/A - 001092 100 GL 45 56 x 100 10 N/A - 001989 150 GL 45 62 x 105 10 N/A - 001093 250 GL 45 70 x 138 10 N/A - 001094 500 GL 45 86 x 176 10 N/A - 001990 750 GL 45 95 x 203 10 N/A - 001095 1000 GL 45 101 x 255 10 N/A - 001096 2000 GL 45 136 x 260 10 N/A - 001991 3500 GL 45 160 x 295 1 N/A - 001097 5000 GL 45 181 x 335 1 N/A - 001098 10000 GL 45 227 x 410 1 N/A - 001099 20000 GL 45 300 x 510 1 N/A -

Glassware 1033 All prices are indicative and exclude VAT. Visit www.dulis.nl DURAN® and Pyrex® Bottles Variants - Narrow neck Cat. No. Description Cap Dim. Side x H (mm) Units/ box €/ box 090441 Square bottle 100 ml GL 32 50 x 109 10 N/A - 090346 Square bottle 250 ml GL 45 64 x 143 10 N/A - 090347 Square bottle 500 ml GL 45 78 x 181 10 N/A - 090348 Square bottle 1000 ml GL 45 94 x 222 10 N/A - Square borosilicate glass bottles TIP See caps on pages 1044 and 1045 hThermoplastic polyester cap and pouring ring hPrinted traceability code: downloadable batch certificate hResistant to hot air sterilisation up to 180 °C hPTFE-coated silicone seal resists chemical attack hThe 25 ml bottle features a glass ring moulded directly into the bottle neck and does not require a pouring ring Cat. No. Volume (ml) Body Ø (mm) Flask H. (mm) GL Thread Units/ box €/ box 232546 25 36 70 25 10 N/A - 232547 50 46 88 32 10 N/A - 232548 100 56 100 45 10 N/A - 232549 250 70 138 45 10 N/A - 232550 500 86 176 45 10 N/A - 232551 1000 101 225 45 10 N/A - 232552 2000 136 260 45 10 N/A - Cat. No. Capacity (ml) Outer body ø (mm) Neck fitting ø SVL (mm) Total height (mm) Units/ box €/ box 090834 25 35 20 65 10 N/A - 090835 50 43 25 80 10 N/A - 090836 100 54 25 105 10 N/A - 090837 250 66 30 135 10 N/A - 090763 500 81 30 175 10 N/A - 090764 1000 101 42 215 10 N/A - 090838 2000 136 60 250 10 N/A - 090839 5000 181 60 324 1 N/A - 090840 10000 227 60 395 1 N/A - 090842 20000 288 60 502 1 N/A - PBT caps (supplied with seal) for flasks Spare seals Cat. No. SVL fitting Outer ø x H (mm) Units/ box €/ box Cat. No. Units/ box €/ box 001485B 13 17 x 16 20 N/A - 001494B 20 N/A - 001486B 15 20 x 18 20 N/A - 001495B 20 N/A - 001487B 18 23 x 18 20 N/A - 001496B 20 N/A - 001488B 20 25 x 18 20 N/A - 001497B 20 N/A - 001489B 22 27 x 18 20 N/A - 001498B 20 N/A - 001490B 25 31 x 26 20 N/A - 001499B 20 N/A - 001491B 30 36 x 26 20 N/A - 001500C 20 N/A - 001492B 42 52 x 30 10 N/A - 001501B 10 N/A - Laboratory flasks, with screw cap and high temperature pouring ring hIn Pyrex®, graduated (except 25 ml flask) hSupplied with a seamless cap made of high performance phenolic resin hSealing by a PTFE / ethylene-propylene composite seal hFlasks sterilisable at 121 °C for 2 hours, PBT screw caps autoclavable and dry steam sterilisable up to 180 °C Pyrex® Capped flasks PBT Enter the Cat.No.on dulis.nl to find our autoclaving procedure WEB Space-saving bottles. hDURAN® borosilicate glass 3.3 hBottle resistant to temperatures from -70 °C to +500 °C hCap resistant to temperatures from -40 °C to +140 °C hCertificate of traceability, each bottle has an identification number

Glassware 1034 Without cap and pouring ring With cap and pouring ring Vol. (ml) Height without cap (mm) Ø neck (mm) Body Ø (mm) Cat. No. Units/ box €/ box Cat. No. Units/ box €/ box 10 50 25 36 090984 10 N/A - - - - 25 70 25 36 090845 10 N/A - - - - 50 87 32 46 090846 10 N/A - - - - 100 100 45 56 090388 10 N/A - 083826 10 N/A - 150 110 45 62 092042 10 N/A - 083827 10 N/A - 250 138 45 70 090389 10 N/A - 092130 10 N/A - 500 176 45 86 090390 10 N/A - 092131 10 N/A - 750 203 45 95 092043 10 N/A - 083828 10 N/A - 1000 225 45 101 090380 10 N/A - 083829 10 N/A - 2000 260 45 136 090381 10 N/A - 083830 10 N/A - 3500 295 45 160 092044 1 N/A - 083831 1 N/A - 5000 330 45 182 090391 1 N/A - 083832 1 N/A - Ergonomically designed bottle with a slim shape to save space. hMade of DURAN® Type 1 neutral borosilicate glass 3.3 hOptimised cap with easy unscrewing, supplied with the bottle hBottles and caps with a traceability code, certificate of conformity available on www.duran-group.com hColoured silicone marker rings (accessory) for easy identification of the bottle hModified autoclave marker on labels for greater visibility Volume (ml) Diameter (mm) Height (mm) Units/ box Standard bottle €/ box Amber bottle €/ box 125 55 124 4 092148 N/A - 092183 N/A - 250 66 158 4 092149 N/A - 092184 N/A - 500 78 193 4 092150 N/A - 092185 N/A - 1000 93 253 4 092151 N/A - 092186 N/A - Cat. No. Description Units/ box €/ box 096126 Self-adhesive label for bottle and cap 100 N/A - 092153 DURAN® Youtility screw cap, blue 10 N/A - 096343 DURAN® Youtility screw cap, white 10 N/A - 092154 Pouring ring for DURAN® Youtility 16 N/A - 092155 Marking ring for DURAN® Youtility * 16 N/A - 096111B Screw cap with PTFE membrane 0.2 µm 4 N/A - * Two of each colour: blue, purple, green, red, orange, yellow, black, white Accessories Red Orange Yellow Green Blue Violet Black White € 20 units 096004 096005 096006 096007 096008 096009 096010 096011 N/A - Marking rings DURAN® Youtility GL45 Glass Bottles Duran® borosilicate glass bottles with a coating that increases the strength of the bottle and prevents glass breakage. DURAN® PROTECT Coated Bottles hBottle geometry to ensure pressure resistance hSecurity for the user and the content hBorosilicate glass DURAN® 3.3 hGL45 Neck hVacuum resistance down to -1 bar hPressure resistance up to +1.5 bar hComplies with DIN EN 1595:1997-05, ISO 4796-1:2016 hBlue printed graduations for better recognition compared to the standard bottle hAutoclavable hAvailable in standard transparent version or with Protect coating and amber version, protecting samples against UV light (complies with USP ‹660› and EP 3.2.1) hRetrace code for better traceability hApplications: vacuum filtration, pressurised sample collection, storage of volatile solvents, storage of gas generating compounds Delivered without cap. DURAN® GL45 Pressure Plus+ Bottles Natural Clear Amber Volume (ml) Neck Ø (thread) Ø (mm) Units/ box Cat. No. €/ box Cat. No. €/ box Cat. No. €/ box 100 100 56 10 090989 N/A - 096951 N/A - 090990 N/A - 250 138 70 10 090950 N/A - 083509 N/A - 090952 N/A - 500 176 86 10 090951 N/A - 083510 N/A - 090953 N/A - 1000 225 101 10 090806 N/A - 096129 N/A - 090807 N/A - DURAN® Bottles Cat. No. Description Units/ box €/ box 090310 Red PBT GL45 cap with PTFE coated silicone seal 180 °C 10 N/A - 999363 ETFE pouring ring for GL45 red cap 10 N/A - Caps

Glassware 1035 All prices are indicative and exclude VAT. Visit www.dulis.nl hDeveloped for the pharmaceutical industry hIn accordance with the recommendations of the international pharmacopoeia hBorosilicate glass type I EP/USP hCoating to prevent contamination hCertificate of analysis available per batch hFull traceability h100% visual control hDrug master file type III DURAN® PURE Bottles h Applications hProduction of pharmaceutical products hStorage of drug intermediates hTransport of APIs Transparent Amber Transparent Amber Volume (ml) Neck Ø (thread) Units/ box Cat. No. €/ box Cat. No. €/ box Neck Ø (thread) Cat. No. €/ box Cat. No. €/ box 25 GLS 25 10 096971 N/A - 096979 N/A - - - - - - 100 GLS 45 10 096972 N/A - 096980 N/A - - - - - - 250 GLS 45 10 096973 N/A - 096981 N/A - - - - - - 500 GLS 45 10 096974 N/A - 096982 N/A - GLS 80 096997 N/A - 097003 N/A - 1000 GLS 45 10 096942 N/A - 096983 N/A - GLS 80 096998 N/A - 097004 N/A - 2000 GLS 45 10 096975 N/A - 096984 N/A - GLS 80 096999 N/A - 097005 N/A - 5000 GLS 45 1 096976 N/A - 096985 N/A - GLS 80 097000 N/A - 097006 N/A - 10000 GLS 45 1 096977 N/A - 096986 N/A - GLS 80 097001 N/A - 097007 N/A - 20000 GLS 45 1 096978 N/A - 096987 N/A - GLS 80 097002 N/A - 097008 N/A - hGL 45 thread and traceability code hHigh security containers corresponding to USP/EP/FDA standards hEquipped with a ring and a cap with PTFE-coated silicone seal hFor use from -196 °C to + 260 °C hAccuracy of the scale ±5%, for filling and quantifying spill volumes hIdeal for sterilisation processes (hot air and dry sterilisation) and depyrogenation hSupplied complete with translucent cap Pouring ring and cap Duran® PREMIUM botlles with ring and cap in TPCH Enter the Cat. No. on dulis.nl to find our our procedure for autoclaving and treating laboratory glassware. WEB DURAN® Bottles Cat. No. Volume (l) DIN (GL) thread Diameter (mm) Height (mm) € 083480 10 45 228 410 N/A - 083481 10 80 228 385 N/A - 083477 20 45 289 505 N/A - 083478 20 80 289 480 N/A - Cat. No. Capacity (ml) Units/ box €/ box 091376 100 10 N/A - 091377 250 10 N/A - 091378 500 10 N/A - 091379 1000 10 N/A - hBorosilicate glass 3.3 type 1 hIdeal for stirring and mixing processes with large and heavy dip tubes hReinforced walls hWith traceability code hDo not contain EGS/TSE hazardous materials hCan be depyrogenated, autoclaved and sterilised hStandard thread (GL45) or wide neck (GLS80) version hSupplied without cap and pouring ring Duran® Thick-walled Bottles Cat. No. Description Units/ box €/ box 091205 Pouring ring 5 N/A - 090387 Cap with seal 5 N/A -

Glassware 1036 Wide-necked bottles with a wide 80 mm thread for easy handling. hLabelling: the white zone makes it easier to identify the contents hExcellent transparency, graduated, inert and chemically resistant hAutoclavable upt to 140 °C hSupplied complete with PP caps (with lip seal for better sealing) and ring hAs accessories, PSU caps with a silicone seal covered on both sides with PTFE hCertificate and batch tracking: using the special 8-digit code on the bottle, a certificate can be obtained directly from the Internet hProtect glass: GLS 80 Protect A for handling particularly valuable or hazardous media, plastic coating (PU) Variants - Wide neck DURAN® and Pyrex® Bottles Accessories GLS 80 Duran® Wide-mouth glass bottles * Supplied without cap With cap Without cap Volume (ml) Height (mm) Ø (mm) Units/ box Cat. No. €/ box Cat. No. €/ box 250 105 95 10 001995 N/A - 002003 N/A - 500 152 101 10 001996 N/A - 002004 N/A - 1000 222 101 10 001997 N/A - 002005 N/A - 2000 252 136 10 001998 N/A - 002006 N/A - 3500 271 160 1 001999 N/A - 002007 N/A - 5000 314 182 1 002000 N/A - 002008 N/A - 10000 389 227 1 002001 N/A - 002009 N/A - 20000 484 288 1 002002 N/A - 002010 N/A - Clear glass Amber glass Protect glass with synthetic coating Vol. (l) Cat. No. Units/ box €/ box Cat. No. Units/ box €/ box Cat. No. Units/ box €/ box 0.25 092135 10 N/A - 092137 10 N/A - 092138 10 N/A - 0.25 - - - - - - 096950* 10 N/A - 0.5 091701 10 N/A - 091825 10 N/A - 091864 10 N/A - 1 091702 10 N/A - 091826 10 N/A - 091865 10 N/A - 2 091703 10 N/A - 091827 10 N/A - 091866 10 N/A - 3.5 092073 1 N/A - - - - - - - 5 091704 1 N/A - 091828 1 N/A - 091867 1 N/A - 10 091705 1 N/A - 091829 1 N/A - - - - 20 091706 1 N/A - 091830 1 N/A - - - - 30 091868 1 N/A - - - - - - - 50 091869 1 N/A - - - - - - - hWith or without cap, with pouring ring hIn borosilicate Pyrex glass, autoclavable hGLS 80 thread with 65 mm internal neck hTraceability code printed on the bottle, downloadable certificate hWhite enamelled graduations and marking surface hMaximum operating temperature of cap and pouring ring: up to 140 °C Pyrex® Wide-mouth Bottles Cat. No. Description Units/ box €/ box 091708B Caps GLS 80 10 N/A - 096116 PP cap GLS 80 with PTFE membrane 0.2 µm 2 N/A - 091832 Pouring ring GLS80, blue PP 10 N/A - 091919 Cap GLS 80, PSU1, with seal 1 N/A - 091920 Pouring ring, white PTFE 5 N/A -

Glassware 1037 All prices are indicative and exclude VAT. Visit www.dulis.nl DURAN® and Pyrex® Bottles Bottles for specific applications Graduated borosilicate glass carboys with tubing at the base of the GL32 thread. Screw cap neck DIN GL45. Supplied complete with screw connection cap, silicone seal, flow tap and PTFE needle valve. Replacement taps Cat. No. Volume (l) € 046420 1 N/A - 046421 2 N/A - 046422 5 N/A - 046423 10 N/A - Cat. No. Description € 046424 Spare tap for 1 and 2 litre carboys N/A - 046425 Spare tap for 5 and 10 litre carboys N/A - Borosilicate glass carboys with tap hBorosilicate glass 3.3 hGL56 white polypropylene cap, Ø 56 mm, autoclavable h2 positions: upright (filter sterilization and storage) and tilted at 45° (pipetting) hGraduations visible on both sides and in both positions hDURAN® Tilt Light shield, white silicone sleeve hIdentification rings: GL56, 4 colours, autoclavable hVaccum filtration unit for Tilt with adapter GL45 (ext)/GL56 (int), 507 mbar recommended, 677 mbar max. hCapacity: 500 ml hFor GL45 neck bottles hGamma sterilised hPES membrane, 90 mm hDifferent porosities available Accessories TILT Bottle Top Filter Unit Cat. No. Description Height (mm) Volume (ml) Units/ box €/ box 096014 Tilt bottle with white GL56 cap (non-sterile) 151 500 4 N/A - Cat. No. Porosity (µm) Units/ box €/ box 096023 0.1 12 N/A - 096024 0.2 12 N/A - 096025 0.45 12 N/A - Cat. No. Description Material Colours Units/ box €/ box 096015 Protective shell, 4 identification rings included Silicone Orange, yellow, blue, pink 4 N/A - 096016 Identification ring GL56 Silicone Orange 20 N/A - 096017 Identification ring GL56 Silicone Yellow 20 N/A - 096018 Identification ring GL56 Silicone Blue 20 N/A - 096019 Identification ring GL56 Silicone Pink 20 N/A - 096020 Adapter GL45 for 45 mm filter unit (autoclavable) PTFE White 1 N/A - 096021 Self-adhesive label for GL56 cap, Ø 40 mm Polyester White 60 N/A - 096022 GL56 Cap Polypropylene White 10 N/A - Cytotoxin Tilt Duran® Cell Culture Flasks Find photos of the accessories on www.dulis.nl WEB hBorosilicate glass hCan be placed in a vertical position or in 45° angle position for ease of use hBottle is graduated to 500ml in the vertical position and 400ml in 45° angle position hTrace Code hCan be sterilised chemically or by dry heat Cat. No. Capacity (ml) Bottle height (mm) Thread size (mm) Units/ box €/ box 785332 500 151 GL 56 4 N/A - Pyrex® GL 56 bottle, dual position

Glassware 1038 Borosilicate glass Bottles hMade of high quality borosilicate glass 3.3 according to ISO 3585 hISO 4796-1 hWith blue polypropylene cap and pouring ring hExcellent chemical and thermal resistance hWith white scale and marking area SLS Select borosilicate glass bottles Cat. No. Volume (ml) Ø x h (mm) Units/ box €/ box 257063 100 56 x 100 10 N/A - 257064 250 70 x 138 10 N/A - 257065 500 86 x 176 10 N/A - 257066 1000 101 x 225 10 N/A - 257067 2000 136 x 260 10 N/A - Cat. No. Cap Units/ box €/ box 048821 33 - 430 200 N/A - 048822 38 - 430 200 N/A - hMade of borosilicate glass meeting USP type I standards hLow alkali to avoid pH changes and maintain content purity hWide opening, pouring ring hSoft shoulder for easy pouring of liquids hGraduations, large marking area Black Phenolic caps, white seal Wheaton® Graduated Media Bottles Enter the reference on dulis.nl to find the the procedure for processing laboratory glassware. WEB Made of high quality borosilicate glass 3.3, very resistant. Cat. No. Volume (ml) Body Ø (mm) Height with cap (mm) Units/ box €/ box 046412B 100 56 100 10 N/A - 511408 250 70 138 10 N/A - 046414B 500 86 176 10 N/A - 046415B 1000 101 225 10 N/A - 046416B 2000 136 260 10 N/A - 046417B 5000 181 330 1 N/A - 046418B 10000 227 410 1 N/A - Cat. No. Vol. (ml) ø (mm) Height with cap Height without cap Cap Units/ box €/ box Bottles with phenolic cap with autoclavable rubber seal 048756 125 55 123 119 33-430 48 354 - 048757 250 67 152 148 33-430 48 462 - 048758 500 88 192 188 33-430 24 N/A - 048759 1000 103 235 231 38-430 24 N/A - Bottles with black cap with autoclavable PTFE-faced rubber seal 048760 125 55 123 119 33-430 48 N/A - 048761 250 67 152 148 33-430 48 555 - 048762 500 88 192 188 33-430 24 400 - 048763 1000 103 235 231 38-430 24 N/A - Rasotherm®ISO Borosilicate Glass Bottles hMade of borosilicate glass 3.3 ISO 4796 / neck ISO GL45 hWith cap in the same colour as the scale hPolypropylene cap with pouring ring hISO 4796 hWith colourless ring and blue cap GL 45 made of polypropylene hGraduated ISO bottles with coloured graduation and coloured cap Volume (ml) Colour red Colour Yellow Colour Green Colour Blue € 10 units 100 046455 046460 046465 046470 N/A - 250 046456 046461 046466 046471 N/A - 500 046457 046462 046467 046472 N/A - 1000 046458 046463 046468 046473 N/A - 2000 046459 046464 046469 046474 N/A -

Glassware 1039 All prices are indicative and exclude VAT. Visit www.dulis.nl Borosilicate glass Bottles hBorosilicate glass 3.3 hSilk-screened graduations and marking area hSupplied with GL45 autoclavable PP caps with pouring ring Vol. (ml) Blue cap Green cap Purple cap Yellow cap White cap Assorted caps** Units/ box €/ box 50* 062708 - - - - - 10 N/A - 100 062709 062710 062711 062712 062713 062714 10 N/A - 250 062715 062716 062717 062718 062719 062720 10 N/A - 500 062721 062722 062723 062724 062725 062726 10 N/A - 1000 062727 062728 062729 062730 062731 062732 10 N/A - 2000 062733 062734 062735 062736 062737 062738 5 N/A - Blue cap Green cap Purple cap Yellow cap White cap Assorted caps** Units/ box €/ box 062739 062740 062741 062742 062743 062744 10 N/A - Blue cap Green cap Purple cap Yellow cap White cap Assorted caps** Units/ box €/ box 062745 062746 062747 062748 062749 062750 10 N/A - Starter packs: 10 bottles of varying volumes and caps Bottles and caps Single caps Pack of 10 bottles and caps that includes the following: 100 ml (2 x), 250 ml (3 x), 500 ml (3 x), 1 l (2 x). * 50 ml bottles with blue GL32 cap. ** 2 of each colour. ** 2 of each colour. Hybex bottles in borosilicate glass with GL45 neck and coloured caps hBorosilicate glass 3.3 hWhite gradations and marking surface hTrace Code hGL 80 thread for wide aperture hSupplied with 140 °C resistant cap and pouring ring hBrown glass version for protection of photosensitive samples hAutoclavable Volume (ml) Dimension W x D x H (mm) Units/ box Clear glass Brown glass Cat. No. €/ box Cat. No. €/ box 500 94 x 94 x 141 10 942659 N/A - 942663 N/A - 1000 105 x 105 x 187 10 942660 N/A - 942664 N/A - 2000 115 x 115 x 260 10 942661 N/A - 942665 N/A - 5000 160 x 160 x 357 6 942662 N/A - 942666 N/A - ISO square bottles GL 80 hFits over the electrodes and keeps them in contact with the electrolyte solution hSealed system to prevent evaporation and salt deposits hBorosilicate glass hWith screw cap and seal hIndelible circular line, maximum level of electrolyte 063105 063106 063107 063108 Reservoir bottles for electrode protection Cat. No. Description € 063105 Protelec bottle for ø 8 mm electrodes N/A - 063106 Protelec bottle for ø 12 mm electrodes N/A - 063107 Protelec storage bottle for ø 8 mm electrodes N/A - 063108 Protelec storage bottle for ø 12 mm electrodes N/A -

Glassware 1040 Soda-lime glass bottles h4 volumes 100 ml, 250 ml, 500 ml and 1000 ml hDin mouth / GL45 cap hSupplied with polypropylene screw cap and pouring ring hMade of colourless soda-lime glass with good chemical resistance ISO soda-lime glass bottles Ideal for storing solvents, chemicals and samples. Made of soda-lime glass type III. Version without cap to be completed with black phenolic cap with autoclavable rubber seal, or white polypropylene caps with PTFE-faced foamed polyethylene seal. Made of soda-lime glass, meeting USP type III standards for light-sensitive samples. Supplied with polypropylene cap with PTFE seal. Boston Wheaton® Glass Bottles, narrow neck Boston Wheaton® Amber Glass Bottles, narrow mouth hSupplied with white polypropylene cap and PTFE-faced foamed polyethylene seal hWide neck hIdeal for storing powders and light sensitive products hMade of soda lime glass, USP type III compliant hMade of soda lime glass, USP type III compliant hSupplied with white polypropylene cap and PTFE-faced foamed polyethylene seal Wheaton® Amber Storage Bottles, wide mouth Wheaton® Clear Glass Storage Bottles, wide mouth Cat. No. Volume (ml) Body Ø (mm) Height with cap (mm) Units/ box €/ box 079036 100 57 106 12 N/A - 079035 250 71 143 12 N/A - 079033 500 86 181 12 N/A - 079034 1000 102 230 10 N/A - Cat. No. Volume (ml) ø x H (mm) Cap Units/ box €/ box 048689 30 31 x 79 20-400 48 N/A - 048690 60 39 x 94 20-400 24 N/A - 048691 125 48 x 112 22-400 24 N/A - 048692 250 60 x 136 24-400 12 N/A - 048693 500 75 x 168 28-400 12 N/A - 048694 1000 94 x 206 33-400 12 N/A - Cat. No. Volume (ml) ø x H (mm) Cap Units/ box €/ box 048709 30 37 x 65 28-400 24 N/A - 048710 60 44 x 75 33-400 24 N/A - 048711 125 54 x 95 38-400 24 N/A - 048712 250 66 x 119 45-400 24 N/A - 048713 500 80 x 146 53-400 12 N/A - 048714 1000 99 x 178 53-400 12 N/A - Cat. No. Volume (ml) ø x H (mm) Cap Units/ box €/ box 048726 125 52 x 84 48-400 24 N/A - 048727 250 63 x 110 58-400 24 N/A - 048728 500 79 x 133 63-400 24 N/A - 048729 2000 122 x 213 83-400 6 N/A - 048730 4000 157 x 256 89-400 4 N/A - Bottles without cap Bottles with PP cap, foam seal Volume (ml) ø x H (mm) Cap Cat. No. Units/ box €/ box Cat. No. Units/ box €/ box 30 31 x 79 20-400 048683 432 N/A - 048848 48 N/A - 60 39 x 94 20-400 048684 288 N/A - 048849 24 N/A - 125 48 x 112 22-400 048685 160 N/A - 048850 24 N/A - 250 60 x 136 24-400 048686 108 N/A - 048851 12 N/A - 500 75 x 168 28-400 048687 60 N/A - 048852 12 N/A - 1000 94 x 206 33-400 048688 12 N/A - 048853 12 N/A -

Glassware 1041 All prices are indicative and exclude VAT. Visit www.dulis.nl Soda-lime glass bottles hWith white polypropylene cap, PTFE-faced foamed polyethylene seal hFor sampling dry goods, powders hMade of soda lime glass, USP type III compliant Wheaton® Straight Edge Jars Space-saving bottles. Made of soda l ime glass, USP type I I I compliant. With white polypropylene cap and PTFE- faced foamed polyethylene seal. hMade of soda lime glass, USP type III compliant hFor dry products and powders, double graduation in Oz and ml Wheaton®Square Bottles Wheaton® Graduated Storage Bottles with cap hAmber Soda-lime glass hSupplied without cap Cat. No. Volume (ml) ø x H (mm) without cap Cap Units/ box €/ box 674481 30 38.10 x 57.90 33-400 127 N/A - 674413 60 44 x 75.40 38-400 72 N/A - 674414 100 48.40 x 88.10 38-400 72 N/A - 674415 125 52.80 x 94.50 38-400 68 N/A - 674419B 500 81.10 x 148.70 58-400 28 N/A - Cat. No. Volume (ml) ø x H (mm) Cap Units/ box €/ box 048720 15 26 x 62 20-400 48 N/A - 048721 30 31 x 72 24-400 48 N/A - 048722 60 39 x 87 28-400 48 N/A - 048723 125 45 x 111 33-400 24 N/A - 048724 250 56 x 137 43-400 24 N/A - 048725 500 68 x 167 48-400 24 N/A - Cat. No. Capacity (ml) ø x H (mm) Cap Units/ box €/ box 048715 60 55 x 48 53-400 24 N/A - 048716 125 60 x 68 58-400 24 N/A - 048717 250 73 x 88 70-400 12 N/A - 048718 500 91 x 95 89-400 12 N/A - 048719 1000 95 x 170 89-400 12 N/A - Cat. No. Description € 100 units 674482 Black cap 33-400 39.20 - 674483 Black cap 38-400 45.10 - 674416 White cap 38-400 44.10 - 674418 Black cap 48-400 54.30 - 674420 Black cap 58-400 87.80 - Polypropylene caps only (Supplied without cap) Amber Glass Powder Bottles Cat. No. Volume (ml) ø x H (mm) Cap Units/ box €/ box With white polypropylene cap and PTFE-faced foamed polyethylene seal. 048695 30 34 x 68 33-400 48 N/A - 048696 60 42 x 83 38-400 48 N/A - 048697 125 51 x 102 48-400 24 N/A - 048698 250 62 x 127 58-400 24 N/A - 048699 500 76 x 145 70-400 24 N/A - With black phenolic cap and autoclavable rubber seal 048700 30 34 x 68 33-400 48 N/A - 048701 60 42 x 83 38-400 48 N/A - 048702 125 51 x 102 48-400 24 N/A - 048703 250 62 x 127 58-400 24 N/A - Without cap 048704 30 34 x 68 33-400 432 N/A - 048705 60 42 x 83 38-400 288 N/A - 048706 125 51 x 102 48-400 144 N/A - 048707 250 62 x 127 58-400 96 N/A - 048708 500 76 x 145 70-400 48 N/A -

Glassware 1042 Soda-lime glass bottles Soda-lime glass Bottles Cat. No. (GL) Thread Material Units/ box €/ box 959093 55 Polypropylene 50 N/A - 959096 45 Polypropylene 50 N/A - hClear or amber glass hDIN168 thread hSupplied without cap Caps Cat. No. Glass Volume (ml) Ø (mm) H (mm) (GL) Thread Units/ box €/ box 959328 Clear 30 36 68 32 126 N/A - 958983 Clear 50 44 75 32 85 N/A - 958984 Clear 100 50 93 40 63 N/A - 958985 Clear 125 54 98 40 80 N/A - 958986 Clear 150 57 104 45 42 N/A - 958987 Clear 250 70 113 55 48 N/A - 958988 Clear 500 84 154 55 20 N/A - 958989 Clear 1000 103.50 180.50 68 18 N/A - 958990 Amber 30 36 68 32 126 N/A - 958991 Amber 50 44 75 32 85 N/A - 958992 Amber 100 50 92.50 40 56 N/A - 958993 Amber 125 54 98 40 84 N/A - 958994 Amber 150 57 104 45 48 N/A - 958995 Amber 250 70 113 55 30 N/A - 958996 Amber 500 84 154 55 20 N/A - 958997 Amber 1000 103.50 180.50 68 12 N/A - Cat. No. Description € bag of 100 674042B White pasteurisable lid, TO 48 ring N/A - 674494 White pasteurisable lid, TO 63 ring N/A - 674044 White pasteurisable lid, TO 82 ring N/A - 674045 Flip Panel sterilisable gold lid, TO 48 ring N/A - 674046 Flip Panel sterilisable white lid, TO 63 ring N/A - 674047 Flip Panel sterilisable white lid, TO 82 ring N/A - Cat. No. Base Ø (mm) Jar H. (mm) Volume (ml) Units/ box €/ box 674028 104 95 500 30 N/A - 674029 104 174 1000 48 N/A - Cat. No. Description € 674030 Twist off lid for 500 and 1000 ml screw top jars N/A - 674031 Screw lid for 500 and 1000 ml screw top jars N/A - Cat. No. Description € 6 units 674424 Orange polypropylene lid N/A - Cap and lid for screw top jars Lid for 1 and 2 litre jars hWhite food jar, soda-lime glass hTo be completed with caps and lids hWhite food jar, soda-lime glass hLid to be ordered separately hFor dry goods and powders 674028 674030 674031 Cat. No. Volume (ml) Ø x H (mm) € 6 units 674422 1000 100 x 165.6 N/A - 674423 2000 100 x 241 N/A - White Glass Screw Top Jars White glass jars Lid,T0 Ring, for bottles and jars hFood glass hDelivered without lids Cat. No. Base Ø (mm) Flask H. (mm) Capacity (ml) Ring Units/ box €/ box 674036B 52 75 106 48 20 N/A - 674037 68 83 212 63 12 N/A - 674039 71 119 378 63 12 N/A - 674040 137 137 660 82 12 N/A - 674041 145 145 750 82 12 N/A - White glass jars

Glassware 1043 All prices are indicative and exclude VAT. Visit www.dulis.nl Coloured caps and coloured ring Caps Phenolic caps with rubber seal for bottles White polypropylene caps with polyvinyl seal for bottles Polypropylene screw caps with PE foam seal Cap Cat. No. Units/ box €/ box Cat. No. Units/ box €/ box Cat. No. Units/ box €/ box 15 - 415 - - - - - - 048854 200 N/A - 18 - 400 - - - - - - 048855 200 N/A - 18 - 415 - - - - - - 048856 200 N/A - 20 - 400 048746 72 N/A - - - - 048857 200 N/A - 20 - 410 - - - - - - 048858 200 N/A - 22 - 400 048747 72 N/A - 048732 72 N/A - 048859 200 N/A - 24 - 400 048748 72 N/A - 048733 72 N/A - 048860 200 N/A - 24 - 410 - - - - - - 048861 200 N/A - 28 - 400 048749 72 N/A - 048734 72 N/A - 048862 200 N/A - 28 - 410 - - - - - - 048863 200 N/A - 33 - 400 048750 72 N/A - - - 048864 200 N/A - 33 - 430 - - - - - - 048865 200 N/A - 38 - 400 048751 72 N/A - 048736 72 N/A - - - - 43 - 400 048752 72 N/A - 048737 72 N/A - - - - 45 - 400 - - - 048984 72 N/A - - - - 48 - 400 048754 72 N/A - 048739 72 N/A - - - - 53 - 400 - - - 048740 72 N/A - - - - 58 - 400 048755 72 N/A - 048741 72 N/A - - - - 63 - 400 - - - 048988 48 N/A - - - - 70 - 400 - - - 048743 24 N/A - - - - 89 - 400 - - - 048745 24 N/A - - - - Phenolic caps with rubber seal for bottles White polypropylene caps with polyvinyl seal for bottles Polypropylene screw caps with PE foam seal Wheaton® Caps with Seal The basics hMade of autoclavable blue polypropylene hMade of red melamine resin, sterilisable in dry heat at 180 °C (Poupinel) h Replacement seals for PBT red caps h Caps hPTFE-coated silicone rubber seals suitable for PBT caps up to approx. 180 °C Caps Replacement seals for PBT red caps Pouring ring Flask neck ø (mm) Units/ bag Colours Cat. No. €/ bag Cat. No. €/ bag Colours Cat. No. €/ bag 25 10 Blue 090320 N/A - - - Blue - - 25 10 Red 090325 N/A - 090954 N/A - Red - - 32 10 Blue 090321 N/A - - - Blue 090323 N/A - 32 10 Red 090326 N/A - 090955 N/A - Red 090327 N/A - 45 10 Blue 090311* N/A - - - Blue 090362 N/A - 45 10 Red 090310 N/A - 090956 N/A - - - - 45 10 Yellow 083469 N/A - - - Yellow 090801 N/A - 45 10 Green 090804 N/A - - - Green 090803 N/A - 45 10 Grey 090805 N/A - - - Grey 090802 N/A - Cat.No. Description Colours € 10 units 046108 Ring 45 mm Yellow N/A - 046109 Ring 45 mm Green N/A - 046110 Ring 45 mm Red N/A - 046756 Ring 45 mm Blue N/A - Cat.No. Description Colours € 10 units 090310R Cap 45 mm (accepts 200 °C) Red N/A - Cat.No. Description Colours € 10 units 046101 Cap 45 mm Yellow N/A - 046102 Cap 45 mm Green N/A - 046103 Cap 45 mm Red N/A - 046104 Cap 45 mm Blue N/A - * Eco version Coloured caps 45 mm caps (GL 45 neck) for ISO bottles in coloured polypropylene. Red melamine cap Coloured rings Coloured polypropylene pouring rings for 45 mm ISO bottles. GL45 Coloured Caps and Coloured Ring

Glassware 1044 Membrane caps Threaded cap with porous membrane withstanding both pressure and vacuum of 0.1 bar. hThread: GL45, GL32 or GL25 hPP cap with PTFE membrane filter 0.2 µm hMaximum operating temperature: 140 °C hIdeal for frequent use in autoclaves hPermeable and simultaneously airtight hEliminates handling and cap closure problems during autoclaving hPTFE (polytetrafluoroethylene) film welded in the middle of the blue threaded cap allows extremely fast pressure compensation between the product in the glass and its environment hGas-permeable, vacuum or overpressure film, but liquid-tight hReduction of the risk of overpressure when packaging and storing gas-forming liquids Cat.No. Description Units/ box €/ box 090386 Membrane cap, GL45 5 N/A - 096113 Membrane cap, GL32 5 N/A - 096115B Membrane cap, GL56 4 N/A - DURAN® Membrane caps, GL45 See caps with tamper-evident ring on dulis.nl WEB hBlue polypropylene hPTFE membrane 0.2 µm hIdeal for autoclaving to ensure a seal while balancing pressure hReduces the risk of contamination Cat. No. Description Units/ box €/ box 096116 Cap GLS80, outer Ø x H (mm): 87 x 40 2 N/A - 091832 Pouring ring GLS 80 in blue PP 10 N/A - DURAN® Membrane cap, GLS80 hWith 0.2 µm PTFE membrane hGL45 thread hSuitable for autoclaving and processes that require pressure compensation hPermeable to gases but not to liquids Cat. No. Description Units/ box €/ box 002020 Screw cap with PTFE membrane 5 N/A - Pyrex® Vented cap Transfer caps hPossibility of working with 2, 3 or 4 GL14 tubing hAdaptable to different tubing diameters hThe elements are compatible with each other hPossibility of adding a sterile 0.2 µm membrane filter hFor use with classic DURAN® bottles hFor total optimization: use vacuum and pressure resistant HPLC bottles with 4-port caps: one sterile filter port and 3 tubing ports DURAN® Caps, GL45 with tubing connection Assembly system to be assembled as required, for safe and sterile transfer of liquids. Cat.No. Description Units/ box €/ box 091380 Screw cap GL45, 2 ports GL14 2 N/A - 091381 Screw cap GL45, 3 ports GL14 2 N/A - 091382 Screw cap GL14, blue, for tube connection 2 N/A - 091395 Screw cap GL14, red, closed 10 N/A - 091383 Insert GL14 for 1.6 mm tubing 1 N/A - 091384 Insert GL14 for 3.0 mm tubing 1 N/A - 091385 Insert GL14 for 3.2 mm tubing 1 N/A - 091386 Insert for screw cap GL14 for 6.0 mm 1 N/A - 091387 Pressure equalization set for 2 and 3 port screw cap, incl. 0.2 µm membrane filter 1 N/A - 091388 Pressure equalization set for 4 port screw cap, incl. 0.2 µm membrane filter 1 N/A - 091389 Spare membrane filter for pressure equalization. 0.2 µm 2 N/A - Cat.No. Description Units/ box €/ box 091390 Complete HPLC pressure bottle set with 4-port screw cap 1000 ml 2 N/A - 091391 Complete HPLC pressure bottle set with 4-port screw cap 500 ml 2 N/A - 091392 Kit: 4-port screw cap, GL45 + 4 rings 1.6 mm ø + 4 rings 3.2 mm ø + 4 seals + 4 black caps 2 N/A - 091393 Spare set: 4 rings 1.6 mm ø + 4 rings 3.2 mm ø + 4 seals + 4 black caps 1 N/A - Caps

Glassware 1045 All prices are indicative and exclude VAT. Visit www.dulis.nl Caps Cat. No. Description Units/ box €/ box 096000 GL 45 Screw cap with 2 hose connectors with EPDM gasket 2 N/A - 092046 Pressure compensation filter 2 N/A - hFor the safe transfer of liquids within a closed and sterile system hWith cap and pouring ring hPolypropylene screw cap with 2 or 3 connection ports hGL45 thread hInterchangeable components with 2-port and 3-port screw caps hAutoclavable at 140 °C Cat. No. Description Units/ box €/ box 002022 GL45 Screw cap with 2 GL14 connection ports 2 N/A - 002023 GL45 Screw cap with 3 GL14 connection ports 2 N/A - 002025 GL14 Screw cap with tubing outlet 1 N/A - 002026 GL14 Screw cap with PTFE coated insert 1 N/A - 002029 Insert for GL14 screw cap with 1.6 mm tubing outlet 1 N/A - 002030 Insert for GL14 screw cap with 3.0 mm tubing outlet 1 N/A - 002031 Insert for GL14 screw cap with 3.2 mm tubing outlet 1 N/A - 002032 Insert for GL14 screw cap with 6.0 mm tubing outlet 1 N/A - 002033 Pressure compensation set for GL14 ports (incl. 0.2μm syringe filter) 1 N/A - 002034 Spare 0.2μm syringe filter 2 N/A - Pyrex® Caps with tubing connection 002023 002033 002025 002034 002029 to 002032 002022 002026 hPolypropylene caps with 4 ports for GLS80 modular wide neck bottles hWith tubing connection hSafe and sterile transfer of liquids DURAN® Caps, GLS80 with tubing connection Cat.No. Description Units/ box €/ box 091833B GLS 80 Screw cap 4 GL18 ports, in PP 2 N/A - 091834 Insert for GL 18 screw cap, 3.2 mm 1 N/A - 091835 Insert for GL 18 screw cap, 6 mm 1 N/A - 091836 Insert for GL 18 screw cap, 8 mm 1 N/A - 091837 Insert for GL 18 screw cap, 10 mm 1 N/A - 091838 Insert for GL 18 screw cap, 12 mm 1 N/A - 091839 Blue screw cap for GL 18 tubing 2 N/A - 091998 Blanking screw cap, red, PBT GL18 2 N/A - 091840 Pressure equalisation cap set for 4-port, GL 18 1 N/A - The hose connection system has been developed especially for the connection of flexible tubes. hGrey polypropylene cap center rotates freely hFor the transfer of liquid within a closed system hIdeal for use with soft elastic tubing with inner diameter of 6-9 mm (Viton, Tygon, silicone) hThe two polyproplylene connectors have angled top and straight underside connectors hThe angled hose connectors prevent the tubes from bending hOptional sterile pressure compensation filter available hWithstands up to + 140 °C hAutoclavable Screw caps GL with 2 hose connectors See PP GL45 caps for temperature sensors on dulis.nl WEB

Glassware 1046 hFor transferring liquids using a peristaltic pump hMade of polypropylene hGL45 thread hSuitable for use with soft elastic tubing that has an inner diameter of 6-9mm hBottle contents can be kept sterile with an optional venting connector with a 0.2μm syringe filter hAutoclavable at 140 °C Cat. No. Description Units/ box €/ box 002024 Twin hose connector screwcap with GL45 screwthread 2 N/A - 002035 0.2μm filter with hose connector adapter 2 N/A - Pyrex® Screw Cap with 2 ports Caps hGL45 and GL25 caps, red PBT hStainless steel barbed tubing (316L) Surgical grade hUse up to 180 °C hAutoclavable at 121 °C for 15 minutes hFor sterile transfer or sampling of liquids between containers hTank caps for feeding laboratory instruments hSet of ports for shaking and culture flasks hTrace Code Complete transfer cap Replacement units for GL45 Cat. No. Thread Number of tubing Tubing diameter (mm) € 084477 GL 25 2 3.2 N/A - 084478 GL 25 3 3.2 N/A - 084479 GL 25 4 3.2 N/A - 096363 GL45 2 3.2 N/A - 096364 GL45 3 3.2 N/A - 096365 GL45 4 3.2 N/A - 096366 GL45 5 3.2 N/A - 084475 GL 45 3 8 N/A - Cat. No. Description Units/ box €/ box 084476 Silicone seal inner x outer Ø. = 40.5 x 27.5 mm; thickness 3 mm 10 N/A - 090367 Cap GL45 in red PBT, central aperture 34 mm 10 N/A - DURAN® Multiport Connector Cap GL45 and GL 25, Stainless Steel hStainless steel type 316L (1.4404/S31603) hMade with a 3D printer hOne piece electroplated for efficient cleaning and sterilisation hHose for tubing with and inner diameter of 6.4 mm hThe stainless steel centre and the cap are 2 separate pieces, the cap can be unscrewed without having to disconnect the hose hSilicone gasket (platinum USP ‹88› catalyzed Class VI) and PP GL45 screw cap for tight closure hTemperature resistant up to 140 °C (or 180 °C with PBT cap) hAutoclavable at 121 °C for 15 minutes hRetrace code for complete traceability h Applications hTransfer of sterile liquids hSampling of liquids from a large volume container to bottles hTank cap for laboratory instruments hPort assembly for shaking bottles and cell culture containers DURAN® GL45 cap, 4-port Cat. No. Description € 096970 PP GL45 cap with seal and aperture and stainless steel tubing N/A - Accessories Cat. No. Description € 084476 Replacement gasket, inner diameter 40.5 mm and outer diameter 27.5 mm, thickness 3 mm N/A - 090367 PBT GL45 screw cap with 34 mm aperture N/A -

Glassware 1047 All prices are indicative and exclude VAT. Visit www.dulis.nl 084487 084488 Caps Caps for specific applications High quality threaded caps for universal use. Fulfils all requirements for storage and packaging of products in the pharmaceutical, chemical and food industry. hThread GL 45 or GL25 hUSP/EP/FDA compliant hUsable temperature range: - 196 °C to + 260 °C hPTFE-coated silicone gasket sealed by welding hPerfect seal between the cap and the gasket, which remains airtight after repeated closures Cat.No. Description Units/ box €/ box 090387 Cap with GL45 seal 5 N/A - 091205 Pouring ring GL45 5 N/A - 092069 Cap with seal GL25 5 N/A - Caps with Premium Seal and Pouring Ring Duran® DURAN® PURE Premium Screw Caps DURAN® PURE GLS80 Screw Caps Cat. No. Description Units/ box €/ box 096988 Screw cap GL25 5 N/A - 096989 Screw cap GL45 5 N/A - 096941 Screw cap GL45 with sealing lip 5 N/A - Cat. No. Description Units/ box €/ box 097009 Screw cap GLS80 5 N/A - hEN PFA (fluoropolymer) hHigh chemical and thermal resistance hAutoclavable hHighly inert PTFE coated silicone seal hProduced and packaged in a clean room hCertificate of analysis available per batch hFull traceability hDrug master file type III hMade of PSU with highly inert PTFE coated silicone seal hHigh chemical and thermal resistance hAutoclavable hCertificate of analysis available per batch hFull traceability h Stericlin®Packaging hSterile barrier according to DIN ISO 11607 consisting of film and medical paper hDesigned to maintain sterile status after sterilisation, three indicators for sterilisation STEAM, EO and FORM printed in the side seal of the package hEffective germ barrier while being permeable to air, steam and sterilising gases hWith colour change indicator h Caps hMaterial: TpCh260 (similar to PFA) hExcellent thermal resistance between -196 °C and + 260 °C hIdeal for dry heat sterilisation/depyrogenation hVery high chemical resistance, complies with USP class VI hSterilisation possible directly in the Stericlin® package hSterile storage up to 6 months after sterilisation Cat. No. Description € 5 units 092080 Premium cap GL 25, PTFE silicone seal N/A - 092081 Premium cap GL 45, PTFE silicone seal N/A - Premium caps produced in a class 7 cleanroom according to EN ISO 146441, completed with a PTFE seal in the Stericlin® package to be sterilised. Stericlin® Caps in ready-to-sterilise packaging hBlue polypropylene GL45 screw cap with holders for temperature sensors or thermocouples hFor holding measuring instruments during sterilisation Cat. No. Description € 084487 Cap with holder and clamping ring in stainless steel and PTFE cannula for thermocouples (length 240 mm, outer diam. 6 mm, inner diam. 3.8 mm) - thermocouples 1/0.3 mm or 1/0.5 mm or 7/0.2 mm N/A - 084488 Cap with stainless steel holder and PTFE clamping ring for temperature probe up to 6 mm diameter N/A - PP GL45 caps for temperature sensors

Glassware 1048 hAlternatives to plastic caps hMade of aluminium, free of hydrocarbon plastics (plasticizers, phthalates, etc.) hTemperature resistant up to +260 °C (depyrogenation or hot air sterilisation); allows storage at low temperatures hCompatible with DURAN® bottles from 100 ml to 20 l hSeptum supplied unassembled for ease of handling and replaceability hThe surface of the cap allows opening and closing even when the cap is wet or when wearing gloves hConductive material, ESD dissipation hAvailable in closed version with a PTFE coated seal or open version for use with a septum or cap hSecure closure with PTFE-coated USP <88>Class VI seal hThe open version can be used with DURAN® GL 45 bromobutyl rubber septum or silicone septa hOptional 45mm plastic cap seals the open cap (opening) hFor the storage of sensitive samples, pharma API DURAN® aluminium GL45 screw caps Accessories Cat. No. Description Units/ box €/ box 096960 Cap GL45 with high temperature resistant silicone PTFE coating seal 10 N/A - 096961 Cap with 34 mm aperture 10 N/A - Cat. No. Description Units/ box €/ box 096962 Phenolic cap compatible with aluminium cap Cat. No. 096961 10 N/A - 096963 PTFE replacement seal 43.5 x 3 mm 10 N/A - 096035 Pre-punched bromobutyl septum for GL45 caps with central aperture 10 N/A - 083461 Silicone septum (peroxide catalysed) for GL45 cap 42.7 x 3 mm 100 N/A - hSuitable for GL45 caps with 34 mm central aperture and GL25 caps with 15 mm central aperture hEasy piercing of the septum with a syringe h Bromobutyl septum hLow permeability to most gases, air, moisture hSuitable for preservation of oxygen-sensitive products, anaerobic cultures hMade of high quality bromobutyl elastomer hOperating temperatures: -50 to +121 °C hAutoclavable at 121 °C for 20 minutes h Silicone-PTFE septum hMade of PTFE-coated silicone, flexible for easy needle penetration and sealing after drilling hHigh chemical resistance hLiquid tightness hOperating temperatures: -50 to +180 °C hAutoclavable at 121 °C for 15 minutes hDry heat sterilisation up to 180 °C GL45 and GL25 Caps, central aperture, adapted septum Cat. No. Description Units/ box €/ box 090367 Red PBT cap GL45 with central aperture 34 mm 10 N/A - 096359 Red PBT cap GL25, centre opening 15 mm 10 N/A - 096035 Pre-drilled bromobutyl septum for GL45 cap with central aperture 10 N/A - 096036 PTFE silicone septum for GL45 cap with central aperture 10 N/A - 096358 Pre-drilled bromobutyl septum for GL25 cap with central aperture 10 N/A - Caps

Glassware 1049 All prices are indicative and exclude VAT. Visit www.dulis.nl hIn PBTP with central aperture hFor passing an electrode or sampling through a septum hDesigned for ISO type glass bottles Single caps ISO septum only Silicone rubber septum or PTFE-coated silicone septum for ISO opening caps Safety caps for Nalgene bottles. h2 Neck sizes: B53 and B83 hPP caps, PTFE body and viton seal hWith 1/8'' ferrules and fittings hEquipped with a barbed port fitting and a threaded fitting for an activated charcoal cartridge Neck 1 inlet port 2 inlet ports 3 inlet ports 2 barbed ports € B53 107013 107014 107015 107016 N/A - B83 107021 107022 107023 107024 N/A - Cat. No. Description Time of use € 107025 Activated carbon filter, 25 grams 3 months N/A - 107026 Activated carbon filter, 50 grams 6 months N/A - 107027 Activated carbon filter, 50 grams with anti-splash cap 6 months N/A - 107028 100 gram activated carbon filter 12 months N/A - Cat. No. GL Hole diameter (mm) Units/ box €/ box 046656 18 11 10 N/A - 046431 25 15 10 N/A - 046432 32 20 10 N/A - 046685 45* 34 10 N/A - * crenellated version hEffectively traps vapours at over 95% hSuitable for activated carbon cartridge slots 107025 107026 107028 Smart Waste Caps, multi-port Smart Waste Caps activated carbon filters 107027 Caps ISO caps with central aperture The Schott polypropylene tamper-evident cap for laboratory bottles (DIN thread) ISO 4796 ensures the confidentiality of your bottle's contents. hThread: GL 45 hMaterial: polypropylene hMaximum operating temperature: up to 140 °C hPTFE coated silicone lip seal Principle: • on the first opening, the tamper-evident ring will be broken and the contents of the bottle will no longer be guaranteed; • after the first use, the cap can be re-used as a simple laboratory bottle cap; • no loss of liquid thanks to the polypropylene pouring rings. Duran® Tamper-evident Caps Cat. No. Description Units/ box €/ box 090349 Lip seal cap 10 N/A - 091848 Silicone/PTFE sealing cap 10 N/A - Silicone PTFE-coated silicone GL Out. ø (mm) Thickness (mm) Cat. No. Units/ box €/ box Cat. No. Units/ box €/ box 18 16 2 046657 10 N/A - - - - 25 22 2 046434 10 N/A - 046437 10 N/A - 32 29 2 046435 10 N/A - 046438 10 N/A - 45 42 3 046436 10 N/A - - - - See Smart Caps thread adapters on dulis.nl WEB

Made with FlippingBook

RkJQdWJsaXNoZXIy MTUwNzIy