Personal Protection Health and Safety 1139 All prices are indicative and exclude VAT. Visit www.dulis.nl Mechanical protection gloves: cut, abrasion, tear Handling gloves for mechanical tasks. Nitrile foam-coated gloves hPURPLE NITRILE* foam coating for high durability hHigh tactile sensitivity for good dexterity hEN 388: 4131 hExcellent grip in both wet and dry conditions hPalm protection against non-acidic solutions (gloves are not intended as protection against liquid chemicals) hKnitted structure, black nylon hSeamless design for better comfort Size Cat. No. 038964 038965 038966 038967 038968 N/A - 7 8 9 10 11 € the 12 pairs Jackson Safety* G40 Gloves MAPA Cut resistant gloves Model Material Interior finish Exterior finish Length (mm) Standards Description / Applications Size Cat. No. Packaging unit € KRYTECH 586 Polyur- -ethane Seamless, knitted, in HDPE fibre PU palm and finger finish 240 to 300 mm (depending on size) Description • Comfort and protection against the risk of cuts • Knitted cuff Applications • Particularly suitable for fine handling in low-dirt environments 6 430040 Bag of 12 pairs N/A - 7 430041 N/A - 8 430042 N/A - 9 430043 N/A - 10 430044 N/A - 11 430045 N/A - Cat. 2 4X43D ISO 13997 18N(1835g) The "mechanical risks" pictogram is accompanied by a 4-digit code, according to the standard EN 388:2003. EN 388:2016 standard introduces two new factors (E and F) to measure the mechanical strength of gloves according to EN ISO 13997. In all cases, 0 indicates the lowest level of performance. What is a Mechanical protection glove? Level X: the test is not applicable or the glove has not been tested. Sources: shieldscientific.fr and ansell.fr Tests Performance levels 0 1 2 3 4 5 A. Resistance to abrasion (cycles) ‹ 100 100 500 2000 8000 - B. Blade cut resistance (factor) ‹ 1.2 1.2 2.5 5.0 10.0 20.0 C. Tearing resistance (Newton) ‹ 10 10 25 50 75 - D. Puncture resistance (Newton) ‹ 20 20 60 100 150 - E. Cut resistance according to ISO standard (Newton) A /2 B /5 C /10 D /15 E /22 F /30 F. Impact protection according to EN standard Success (P) or failure (no marking) abcdef
RkJQdWJsaXNoZXIy MTUwNzIy