een uitzonderlijk avontuur DULIS bv - Nederland Marten Meesweg 25-G - 3068 AV Rotterdam www.dulis.nl I + 31 10-899 13 61 I info@dulis.nl
FLASKS AND PLASTIC • Bottles In polystyrene 795 In polypropylene 795 to 798 In high density polyethylene 799 à 807 In fluorinated high density polyethylene 807 In low density polyethylene 808 to 810 In TPX 810 In FEP 811 In PFA 811 In PTFE 811 In PVC 812 In polycarbonate 812 to 814 In PET 814 to 816 In PETG 816 to 818 In aluminium 819 • Canisters In polypropylene 819 to 822 In High density polyethylene 822 to 826 In Fluorinated high density polyethylene 827 In Low density polyethylene 827 In polycarbonate 828 and 829 In PETG 829 • Jerricans In polypropylene 829 In high density polyethylene 829 et 830 In low density polyethylene 831 • Barrels 831 • Transfer caps 831 and 832 • Washing bottles 833 to 836 • Screen-printed washing bottles 837 to 841 • Dispensing bottles 842 • Dropper bottles 843 to 845 • Scintillation vials 846 and 847 • Sampling jars with screw cap, without label In polystyrene 848 and 849 In polypropylene 850 to 855 In low density polyethylene 855 and 856 In polycarbonate 856 In TPX 856 • PSampling jars with screw cap, with label In polystyrene 857 et 858 In polypropylene 858 to 861 With spatula or spoon 861 et 862 With suction system for vacuum tubes 862 With slide 862 With thiosulphate 863 With boric acid 863 With handle 864 • Push-on lid jars In polystyrene 865 In polypropylene 865 and 866 With handle 867 With thiosulphate 867 In low density polyethylene 867 In high density polyethylene 867 • Buckets 868 and 869 • Bins 870 to 875 • Boxes 875 to 878 • Transport boxes and baskets 878 to 879 • Drawers 879 and 880 • Storage modules 881 and 882 • Beakers In polystyrene 883 In SAN 883 In polypropylene 883 to 886 In high density polyethylene 886 In TPX 887 and 888 In PFA 888 In PTFE 888 • Test tubes 889 to 892 • Erlenmeyer 893 to 895 • Volumetric flasks 895 and 896 • Decanting ampoules 896 • Funnels 897 to 900 • Weighing pans 900 to 903 • Shovels and spoons 903 to 905 • Plastic accessories 905 • Dessicators 906 to 909 • Tubing 910 to 920 • Tube clamps 920 and 921 An extraordinary adventure
Plasticware 793 All prices are indicative and exclude VAT. Visit www.dulis.nl Plastics in the laboratory Polystyrene (PS) hRigid, non-toxic polymer hModerate chemical resistance hAs transparent as glass hBreakable at room temperature, may break if dropped hTemperature range: -40 °C to +90 °C hNot autoclavable hUse: single-use laboratory containers High density polyethylene HDPE) hRigid and translucent hGood to excellent chemical resistance hRobust hTemperature range: -100 °C to +120 °C hNot autoclavable hUse: bottles and flasks Polymethylpentene (PMP, TPX) hRigid and transparent hGood to excellent chemical resistance hLow density and high transparency hBreakable at room temperature, may break if dropped hTemperature range: -180 °C to +145 °C hAutoclavable at +121 °C hUse: beakers and test tubes Polymethylmethacrylate acrylic (PMMA) hRigid and transparent hGood chemical resistance hUltraviolet resistance hTemperature range: +20 °C to +145 °C hNot autoclavable hUse: boxes Polypropylene (PP) hTranslucent hGood to excellent chemical resistance hGood resistance and stability over time hBreaks at 0 °C, may break if dropped hTemperature range: 0 °C to +135 °C hAutoclavable at +121 °C hUse: beakers, flasks and test tubes Low density polyethylene (LDPE) hFlexible and translucent hGood to excellent chemical resistance hRobust and virtually unbreakable hTemperature range: -50 °C to +80 °C hNot autoclavable hUse: washing bottles Polyvinyl chloride (PVC) hRigid or flexible, coloured or not hModerate chemical resistance hExcellent resistance to oils (except essential oils) hVery low permeability to most gases hTemperature range: -25 °C to +70 °C hNot autoclavable hUse: trays and tanks Styrene-acrylonitrile (SAN) hRigid and transparent hImproved chemical resistance compared to polystyrene hTemperature range: +20 °C to +85 °C hNot autoclavable hUse: beakers, volumetric flasks Polycarbonate (PC) hTransparent, strong and rigid hModerate chemical resistance hHigh impact resistance hIdeal for high speed centrifugation hTemperature range: -135 °C to +135 °C hAutoclavable at +121 °C hUse: beakers and test tubes Polyethylene terephthalate (PET) hTransparent, slightly flexible depending on the thickness of the walls hModerate chemical resistance hAs transparent as glass hTemperature range: -10 °C to +60 °C hNon-autoclavable, can be sterilised by radiation or with compatible chemicals hUse: bottles Glycosylated polyethylene terephthalate (PETG) hTransparent, slightly flexible depending on the thickness of the walls hModerate chemical resistance hAs transparent as glass hTemperature range: -40 °C to +70 °C hNon-autoclavable, can be sterilised by radiation or with compatible chemicals hUse: cell culture, biological sample storage; bottles, carboys, Erlenmeyer flasks Polytetrafluoroethylene (PTFE) hOpaque and rigid hExcellent chemical resistance hTemperature range: -200 °C to +260 °C hAutoclavable at +121 °C hUse: bottles, beakers and washing bottles Perfluoroalkoxy (PFA) hTranslucent and slightly flexible hExcellent chemical resistance hTemperature range from -200 °C to +260 °C hAutoclavable at +121 °C hUse: bottles and beakers Fluorinated ethylene propylene (FEP) hTranslucent and flexible hExcellent chemical resistance hTemperature range from -100 °C to +205 °C hAutoclavable at +121 °C hUse: bottles and washing bottles The different types of plastic resin ››› Polyolefins ››› Technical resins ››› Fluoropolymers • Non-toxic, non-contaminating materials with varying degrees of breakage resistance • At room temperature, resistant to almost any chemical for up to 24 hours (refer to chemical resistance guides) • Can be damaged by long exposure to ultraviolet light • Outstanding strength and durability for demanding laboratory applications • Very high chemical resistance
Plasticware 794 Maintenance and use Plastics in the laboratory ››› General information ››› Cleaning ››› Sterilization ››› Heating ››› Recycling and disposal • The following are general recommendations for the care and use of plastics in the laboratory. • This information is purely indicative, as each plastic resin has its own properties, so please contact us for further details. hChemicals can change the characteristics (strength, surface, colour, dimensions) hCheck the chemical compatibility with the polymer used before handling hThe plastic labware can be cleaned with a non-alkaline detergent and a soft cloth or sponge hPolystyrene and polycarbonate are particularly sensitive and more susceptible to alkali attack hIf you use a dishwasher, always programme short cycles and a maximum temperature of 60 °C. High temperature can affect the plastic and volumetric accuracy of the graduated consumables hPolystyrene, acrylic and polycarbonate, due to temperature limitations and deterioration of resistance, should not be placed in the dishwasher hIf using an ultrasonic bath, ensure that the products are not in direct contact with the membrane hCheck that the plastic is autoclavable and can withstand repeated exposure to +121 °C hIt is recommended to use a 20 minute cycle at +121 °C and 1 bar hAlways unscrew the caps of bottles or tubes before autoclaving. Any material obstructing the opening may cause deformation or destruction of the plastic hNever place plastic directly in contact with a flame or hot plate hThe recycling process requires plastic products to be sorted according to their resin type, before being recovered for recycling into resins that can be used as raw material for new products hMany of our products are coded for easy identification hIf the product cannot be recycled, always dispose of it in accordance with the applicable regulations and laws
Plasticware 795 All prices are indicative and exclude VAT. Visit www.dulis.nl Bottles hPolypropylene cap hWaterproof hAutoclavable Cat. No. Volume (ml) Units/ box €/ box 978219 150 24 N/A - 978220 250 24 N/A - 978221 500 24 N/A - 978222 1000 24 N/A - Sterile container bottles Polystyrene bottles, narrow neck Polypropylene bottles, wide neck Capacity (ml) 30 60 125 250 500 1000 Cap size (mm) 28 28 38 43 53 63 Units/bag 12 12 12 12 12 6 Units/box 72 72 72 72 48 24 Cat. No. 028738 028739 028740 028741 028742 028743 €/box N/A - N/A - N/A - N/A - N/A - N/A - NalgeneTMround bottles, wide neck Capacity 30 60 125 250 500 1000 Cap size (mm) 28 28 38 43 53 63 Cat. No. 029994 - 029996 - - 029999 Units/box 72 - 72 - - 24 €/box N/A - - N/A - - - N/A - NalgeneTMeconomy bottles Volume (ml) 30 60 125 250 500 1000 ø x H (mm) 33 x 69 39 x 88 51 x 98 61 x 125 72 x 164 91 x 199 Cap 28-410 28-410 38-410 43-410 53-410 63-415 Units/bag 12 12 12 12 12 12 Units/box 72 72 72 72 48 48 Cat. No. 048364 048365 048366 048367 048368 - €/box N/A - N/A - N/A - N/A - N/A - - Polypropylene bottles, wide neck hWaterproof hAnti-drip ring hDelivered with cap assembled hDouble-sealed cap hWide neck hPolypropylene cap hWaterproof hIn polystyrene hSterile hFor storage and recovery of cell culture media hNeck diameter: 45 mm hUnit packaging
Plasticware 796 hVery good sealing hPolypropylene bottles, autoclavable at + 121 °C hGood chemical resistance Azlon® wide neck polypropylene bottles Bottles Polypropylene bottles, wide neck hIdeal for photosensitive products hOpaque hVery good sealing hPolypropylene bottles, autoclavable at + 121 °C Cat. No. Volume (ml) ø (mm) Height (mm) Units/ box €/ box 232804 60 40 82 10 N/A - 723866 150 51 116 10 N/A - 232805 250 60 140 10 N/A - 232545 500 75 161 10 N/A - 232806 1000 90 205 5 N/A - 232761 2000 120 242 5 N/A - Azlon® Amber polypropylene bottleswithwide neck hWith graduations hDurable and long-lasting, autoclavable hCertified for food contact hNeck and thread according to DIN 13316 and 168 Cat. No. Vol. (ml) Grad. (ml) ø x H (mm) Neck ø (mm) DIN Units/ box €/ box 50 10 38 x 88 24 GL32 100 391273 N/A - 100 20 48 x 105 24 GL32 100 391274 N/A - 250 25 60 x 140 38 GL45 50 391275 N/A - 500 100 75 x 170 38 GL45 25 391276 N/A - 1000 100 95 x 206 55 GL63 17 391277 N/A - 2000 100 120 x 252 55 GL63 15 391278 N/A - Polypropylene standardised wide neck graduated flasks Enter the Cat. No. to find our autoclaving procedure WEB Find VITgrip® screw bottles on dulis.nl WEB In Autoclavable polypropylene. For powder transport or water sampling. Capacity (l) Ø x H (mm) cap Ø (mm) Cat. No. € 2 119 x 244 100 029032A N/A - 4 153 x 288 100 029534A 36N/A - NalgeneTMlarge round bottles with wide opening hThick walls, reinforced closure (watertightness guaranteed) hFor the safe storage of media, biological or chemical liquids, dry chemicals hExcellent chemical resistance, ideal for vacuum applications Volume (ml) 250 1000 2000 4000 5000 ø x H (mm) 74 x 135 93 x 226 119 x 260 155 x 338 156 x 414 Capuchon type 53B 53B 53B 83B 83B Cat. No. 029307 029305 029306 029296 028162 Units/bag 1 6 2 1 1 €/bag N/A - N/A - N/A - N/A - N/A - NalgeneTMHigh-strength bottles 10 units BULK version Vol. (ml) Ø x H (mm) Cat. No. € Cat. No. Units/ box €/ box 30 32 x 70 BWP0030N N/A - 785409 1200 N/A - 60 40 x 82 BWP0060N N/A - 761866 740 N/A - 100 51 x 89 232661 N/A - - - - 125 51 x 104 BLP0125P N/A - 761867 350 N/A - 150 51 x 116 232662 N/A - 761868 350 N/A - 250 60 x 140 BWP0250P N/A - 761869 200 N/A - 500 75 x 161 BWP0500P N/A - 761872 100 N/A - 1000 90 x 205 BWP1000P** N/A - 761870 60 N/A - ** 5 units
Plasticware 797 All prices are indicative and exclude VAT. Visit www.dulis.nl Bottles Polypropylene bottles, wide neck Polypropylene bottles, narrow neck Capacity (ml) 60 175 250 500 1000 Dimensions (mm) 83 x 38 x 38 102 x 51 x 51 114 x 64 x 64 146 x 76 x 76 181 x 95 x 95 Cap size (mm) 28 38 43 53 63 Cat. No. 029405 029406 029407 029366 029408 Units/bag 12 12 12 12 6 €/bag N/A - N/A - N/A - N/A - N/A - NalgeneTM Square bottles with wide neck hIn polypropylene Autoclavable hCap In white polypropylene hWith integrated moulded handles hPolypropylene cap hWaterproof hAutoclavable hPolypropylene Square bottle hWide neck hPolypropylene cap hWaterproof hAutoclavable hPolypropylene bottle and cap hNarrow neck hWaterproof Capacity Cat. No. € Material Cap 029356A 4 litres PP 100 mm N/A - NalgeneTM Large square bottles with wide opening Capacity (ml) 4 8 15 30 60 125 175 250 500 500 1000 Cap size (mm) 13 20 20 20 20 24 24 24 28 38-430 38-430 Units/bag 12 12 12 12 12 12 12 12 12 12 6 Units/box 72 72 72 72 72 72 72 72 48 48 24 Cat. No. 028787 028785 028786 028779 028780 028781 - 028782 028783 - 028784 €/box N/A - N/A - N/A - N/A - N/A - N/A - - N/A - N/A - - N/A - NalgeneTM round bottles with narrow neck Capacity (ml) 30 60 125 250 500 1000 Cap size (mm) 20 20 24 24 28 38–430 Cat. No. 029988 029989 029990 029991 - - Units/box 72 72 72 72 - - €/box N/A - N/A - N/A - N/A - - - NalgeneTM economy bottles
Plasticware 798 Bottles Polypropylene bottles, narrow neck hWaterproof hAnti-drip ring hDelivered with cap assembled Volume (ml) 4 8 15 30 60 125 250 500 1000 ø x H (mm) 16 x 38 25 x 43 25 x 56 32 x 69 39 x 84 50 x 101 61 x 129 72 x 171 91 x 210 Cap 13-425 20-410 20-410 20-410 20-410 24-410 24-410 28-410 38-430 Units/bag 12 12 12 12 12 12 12 12 6 Units/box 72 72 72 72 72 72 72 48 24 Cat. No. 048338 048339 048340 048341 048342 048343 048344 048345 048346 €/bag N/A - N/A - N/A - N/A - N/A - N/A - N/A - N/A - N/A - Wheaton® Polypropylene bottles, narrow neck hHigh transparency hAutoclavable upt to + 121 °C maximum hExcellent chemical resistance and thermal quality hReduced CO 2 , easy to recycle hRemove the cap before autoclaving hSupplied without cap, to be ordered separately) Cat. No. Vol. (ml) Body section (mm) Ø neck Internal (mm) Outer thread Ø (mm) Height without cap (mm) € 063408 250 60 x 60 18.6 32 136 N/A - 063410 1000 94 x 94 28.6 45 204 N/A - Bouchons With PTFE seal, with tamper evident ring. Cat. No. Neck (mm) Colours Material € 063405 32 White Polypropylene N/A - 063406B 45 Black HDPE N/A - Highly transparent polypropylene bottles with narrow neck hRobust, watertight, autoclavable (place the cap on the tube without screwing it) h70 mm neck that accepts screw caps with specific Mason threads hFor use with Osterizer and other mixers suitable for Mason jar threads hConvenient for fluid transfer when used with a fluid transfer cap Cat. No. 029861 Cat. No. Volume (ml) Units/ box 029857 500 6 N/A - 029858 1000 6 N/A - 029859 2000 4 N/A - 029860 3000 1 N/A - €/ box Cat. No. Description 029861 PP liquid transfer cap ø 70 mm N/A - € Liquid transfer cap NalgeneTMpolypropylene Mason jars Capacity (ml) 30 60 125 250 500 1000 2000 H x side (mm) 63 x 38 83 x 41 110 x 54 116 x 61 146 x 74 181 x 95 271 x 116 Cap size (mm) 20 24 38–430 38–430 38–430 38–430 53B Cat. No. 028701 028702 028703 028704 028705 028706 - Units/bag 12 12 12 12 12 6 - €/bag N/A - N/A - N/A - N/A - N/A - N/A - - NalgeneTMSquare bottles with narrow neck hSquare bottle and cap in polypropylene hWaterproof hAutoclavable
Plasticware 799 All prices are indicative and exclude VAT. Visit www.dulis.nl Bottles High density polyethylene bottles, wide neck Capacity (ml) 30 60 125 250 500 1000 1500 Cap size (mm) 28 28 38 43 53 63 63 Units/bag 12 12 12 12 12 6 6 Units/box 72 72 72 72 48 24 6 HDPE Round bottle with wide neck, PP cap Cat. No. 028725 028726 028727 028728 028729 028730 029391 €/box N/A - N/A - N/A - N/A - N/A - N/A - N/A - Amber HDPE round bottle with wide neck, PP amber cap Cat. No. 028744 028745 028746 028747 028748 028749 - €/box N/A - N/A - N/A - N/A - N/A - N/A - - HDPE Amber HDPE NalgeneTMround bottles with wide neck HDPE bottle with wide neck, PP cap Features Waterproof Capacity 30 60 125 250 500 1000 Cap size (mm) 28 28 38 43 53 63 Cat. No. 028810 028811 028812 028813 028814 028815 Units/box 72 72 72 72 48 24 €/box N/A - N/A - N/A - N/A - N/A - N/A - Cat. No. - - 028820 028821 028822 028823 Units/box - - 500 250 125 50 €/box - - N/A - N/A - N/A - N/A - Amber HDPE bottle with wide neck, amber PP cap Features Waterproof Cat. No. - - 028806 028807 028808 028809 Units/box - - 72 72 48 24 €/box - - N/A - N/A - N/A - N/A - NalgeneTMeconomy bottles hRound bottle with wide neck in HDPE hPolypropylene cap hWaterproof HDPE bottles hWaterproof hAnti-drip ring hDelivered with cap assembled hDouble-sealed cap Volume (ml) 30 60 125 250 500 1000 ø x H (mm) 33 x 69 39 x 88 51 x 98 61 x 125 72 x 164 91 x 199 Cap 28-410 28-410 38-410 43-410 53-410 63-415 Units/bag 12 12 12 12 12 12 Units/box 72 72 72 72 48 48 HDPE bottle Cat. No. 048353 048354 048355 048356 048357 048358 €/bag N/A - N/A - N/A - N/A - N/A - N/A - Amber HDPE bottle Cat. No. 048369 048360 048361 048362 048363 048772 €/bag N/A - N/A - N/A - N/A - N/A - N/A - Wheaton®HDPE bottles with wide neck 10 units BULK version Vol. (ml) Ø x H (mm) Cat. No. € Cat. No. Units/ box €/ box 30 32 x 70 723861 N/A - 761838 1200 N/A - 60 40 x 82 723862 N/A - 761839 740 N/A - 100 51 x 89 232659 N/A - 761840 420 N/A - 125 51 x 104 232581* N/A - 761841* 350 N/A - 150 51 x 116 232660* N/A - 761842* 350 N/A - 250 60 x 140 723883 N/A - 761843 200 N/A - 500 75 x 161 723864 N/A - 761844 100 N/A - 1000 90 x 205 723865** N/A - 761845 60 N/A - 2000 120 x 242 121304** N/A - 761846 30 N/A - * Not approved for food contact ** Per 5 hIn translucent HDPE hPolypropylene screw caps hWaterproof hGood chemical resistance
Plasticware 800 hIn HDPE hWaterproof polypropylene cap hFor storage and transport of liquids hUniform wall thickness hGood chemical resistance hNatural version for content visibility or amber for light sensitive samples High density polyethylene bottles, wide neck Bottles Cat. No. Volume Colour Neck Height (mm) Ø of the base (mm) Units/ box €/ box 135735 8 ml Natural Large 42.6 24.9 1000 N/A - 135736 15 ml Natural Large 56.1 24.9 1000 N/A - 135737 30 ml Natural Large 59.2 34 400 N/A - 135738 60 ml Natural Large 81 39 650 N/A - 135739 125 ml Natural Large 95 50 350 N/A - 135740 250 ml Natural Large 128.2 60.5 200 N/A - 135741 500 ml Natural Large 162.8 72.2 100 N/A - 135742 1 l Natural Large 193.5 91 50 N/A - 135744 8 ml Amber Large 42.6 24.9 1000 N/A - 135745 15 ml Amber Large 56.1 24.9 1000 N/A - 135746 30 ml Amber Large 59.2 34 400 N/A - 135747 60 ml Amber Large 81 39 650 N/A - 135748 125 ml Amber Large 95 50 350 N/A - 135749 250 ml Amber Large 128.2 60.5 200 N/A - 135750 500 ml Amber Large 162.8 72.2 100 N/A - 135751 1 l Amber Large 193.5 91 50 N/A - Round HDPE bottles Cat. No. Vol. (ml) Body size (mm) Inn. neck Ø (mm) Out. Thread Ø (mm) H. without cap (mm) € 063448 250 61 24 28 129.5 N/A - 063450 1000 97 39.2 50 203 N/A - hNatural hWith graduation hSupplied with screw cap hGood chemical resistance HDPE graduated cylindrical bottles with wide neck Made of non-autoclavable HDPE. For powder transport or water sampling. Cat. No. Capacity (l) Ø x H (mm) Ø (mm) cap € 029330A 2 119 x 244 100 N/A - 029533A 4 153 x 288 100 N/A - NalgeneTM large round bottles with wide opening hRound bottles with plug seal and screw cap (mounted) hWide neck for easy filling and dispensing hEasy-grip caps hFor use with powders or liquids h1000, 1500 and 2000 ml jars are suitable for food contact (FDA criteria) Volume (ml) Out. Ø x H (mm) Inn. Ø Neck (mm) Cat. No. Units/ box €/ box Cat. No. Units/ box €/ box 65 50 x 51 35 799228 500 N/A - 799229 10 N/A - 70 50 x 60 35 799230 400 N/A - 799231 10 N/A - 120 56 x 71 35 799232 500 N/A - 799233 10 N/A - 250 69 x 94 48 799234 300 N/A - 799235 10 N/A - 500 86 x 109 70 - - - - - - 1000 112 x 129 86 799238 80 N/A - 799239 5 N/A - 1500 112 x 184 86 799240 60 N/A - 799241 5 N/A - HDPE Round jars with screw cap and plug seal Azlon®
Plasticware 801 All prices are indicative and exclude VAT. Visit www.dulis.nl High density polyethylene bottles, wide neck Bottles hWaterproof, for storage and shipping hTo be completed with a black screw cap with foam seal (to be ordered separately) Cat. No. Volume (ml) Body Ø (mm) Inner neck Ø (mm) Thread Height (mm) € 063278 100 48 31 40 77 N/A - 063213 250 65 41 50 98 N/A - 063214 500 80 53 65 122 N/A - 063215 750 94 53 65 130 N/A - 063216 1000 100 67 80 153 N/A - 063217 1500 114 67 80 173 N/A - 063262 2000 126 67 80 192 N/A - Cat. No. For pots with a volume of (ml) Thread € 063257 100 40 N/A - 063258 250 50 N/A - 063259 500/750 65 N/A - 063260 1000/1500/2000 80 N/A - Caps HDPE wide neck jars hHigh density polyethylene hSupplied with cap and plug seal hFor powders and solid samples Cat. No. Volume (ml) ø x H (mm) Diameter Neck (mm) Units/ box €/ box 391318 70 50 x 60 36 100 N/A - 391319 120 56 x 71 36 100 N/A - 391320 250 69 x 94 50 50 N/A - 391321 500 86 x 107 70 50 N/A - 391322 1000 111 x 128 85 20 N/A - 391324 1500 111 x 182 87 10 N/A - 391323 2000 111 x 235 87 10 N/A - Cylindrical jars with lid Cat. No. Non-sterile Sterile Non-sterile Sterile Volume (ml) Units/ box 50 39 x 70 600 - - - - 030412 N/A - 030371 N/A - 100 52 x 80 335 030408 N/A - 030372 N/A - 030413 N/A - 030382 N/A - 150 52 x 108 250 - - 030373 N/A - - - 030383 N/A - 250 61 x 125 145 030321 N/A - 030374 N/A - 030415 N/A - 030384 N/A - 500 81 x 136 140 030409 N/A - 030323 N/A - 030416 N/A - 030324 N/A - 1000 100 x 174 68 030410 N/A - 030331 N/A - 030417 N/A - 030332 N/A - 2000 122 x 220 25 030411 N/A - - - 030418 N/A - 030340 N/A - €/ box Cat. No. €/ box Cat. No. €/ box Cat. No. €/ box Dimensions (mm) Wide neck with single closure Wide neck with double closure Corning® GosselinTM Polyethylene cylindrical bottles with wide-mouth and red cap hThick walls, reinforced closure (watertightness guaranteed) hFor the safe storage of media, biological or chemical liquids, dry chemicals hExcellent chemical resistance Volume (ml) 1000 2000 4000 ø x H (mm) 93 x 226 119 x 260 155 x 338 Cap type 53B 53B 83B Cat. No. 029303 028119 029304 Units/bag 6 2 1 €/bag N/A - N/A - N/A - NalgeneTM High-strength bottles
Plasticware 802 Natural or amber. Volume (ml) 125 250 500 1000 2000 H x W x D (mm) 102 x 64 x 38 114 x 76 x 48 140 x 94 x 58 180 x 125 x 71 239 x 152 x 81 Cap ø (mm) 28 38 48 53 63 HDPE Rectangular bottle, natural Cat. No. 029392 029393 029394 029395 029396 Units/bag 12 12 12 6 4 Units/box 72 72 48 24 12 €/bag N/A - N/A - N/A - N/A - N/A - HDPE Rectangular bottle, amber Cat. No. 029397 029398 029399 029400 029401 Units/bag 12 12 12 6 4 Units/box 72 72 48 24 12 €/bag N/A - N/A - N/A - N/A - N/A - High density polyethylene bottles, wide neck Bottles Capacity (ml) 60 175 250 500 1000 Dimensions (mm) 83 x 38 x 38 102 x 51 x 51 114 x 64 x 64 146 x 76 x 76 181 x 95 x 95 Cap size (mm) 28 38 43 53 63 Cat. No. 028720 028721 028722 028723 028724 Units/bag 12 12 12 12 6 €/bag N/A - N/A - N/A - N/A - N/A - HDPE NalgeneTM Square bottles with wide neck HDPE Rectangular bottles hIn HDPE hCap In white polypropylene hWith integrated moulded handles Capacity Cat. No. € Material Cap 029535A 4 litres HDPE 100 mm N/A - Large square bottles with wide opening Screw cap for wide-neck bottles hBlack, PE foam gasket hNatural hSupplied without cap (to be ordered separately) Cat. No. For pot volume (ml) Internal Thread (mm) € 063257 100 40 N/A - HDPE square bottle with wide neck hFor storage of liquids, solids or powders hTranslucent polyethylene hWide neck, easy to fill hGraduated models h Aseptic and capped (Sealed screw caps) hModels in brown for light-sensitive reagents hMolded-in handle for the 2.7 l for a secure grip h2.5 l and 2.7 l models recommended for urine collection Cat. No. Volume (l) Closure colour Units/ box 030846 2 230 73 Natural Red 50 N/A - 030848B 2.5 263 77 Brown White 35 N/A - 030849 2.7 250 70 Natural Red 30 N/A - 030850 2.7 250 70 Brown Yellow 30 N/A - €/ box Colour Height (mm) ø * (mm) Corning® GosselinTM Polyethylene 2 litre to 2.7 litre square bottles with wide mouth * opening hHDPE Square bottle hPolypropylene cap hWide neck hWaterproof
Plasticware 803 All prices are indicative and exclude VAT. Visit www.dulis.nl High density polyethylene bottles, wide neck Bottles Cat. No. Non-sterile Sterile Non-sterile Sterile Volume (ml) Units/ box 150 50 x 50 x 95 300 030419 N/A - - - 030423 N/A - - - 250 57 x 57 x 109 210 030420 N/A - 030428 N/A - 030424 N/A - 030399 N/A - 500 76 x 76 x 122 175 030421 N/A - 030429 N/A - 030425 N/A - 030375 N/A - 1000 95 x 76 x 185 90 030422 N/A - - - 030398 N/A - 030391RG N/A - 2000 109 x 96 x 230 50 030820 N/A - 030432 N/A - 030426 N/A - 030434 N/A - 2500 110 x 110 x 263 35 030345C* N/A - - - - - - - * White cap €/ box Cat. No. €/ box Cat. No. €/ box Cat. No. €/ box Dimensions (mm) Wide neck with single closure Wide neck with double closure Corning® GosselinTM Polyethylene square bottles with wide neck and red cap hSquare section hRecess for labelling hIdeal for liquid, pasty or granulated substances hSquare section for labelling hSupplied without cap, to be ordered separately) hUN approval for solids Cat. No. Volume (ml) Body size (mm) Inn. neck Ø (mm) Out. Thread Ø (mm) H. without cap (mm) € 063291 100 45 x 45 24 32 101 N/A - 063292 250 59 x 59 35 45 129.5 N/A - 063293 500 60 x 60 35 54 164 N/A - 063270 750 83 x 83 42.5 54 188 N/A - 063294 1000 85 x 85 42.5 54 214 N/A - 063300 1500 108 x 108 68.5 80 209 N/A - 063271 2500 122 x 122 68.5 80 209 N/A - 063272 4000 142 x 142 68.5 80 294 N/A - Caps for wide-mouth bottles in HDPE hSquare section hRecess for labelling hSupplied without cap, to be ordered separately) Cat. No. Approval For bottle volume (ml) Body size (mm) Inn. neck Ø (mm) Out. Thread Ø (mm) H. without cap (mm) € 063319 UN 3h1/X0.3/S 100 45 x 45 24 32 101 N/A - 063320 UN 3h1/X0.8/S 250 59 x 59 35 45 129.5 N/A - 063321 UN 3H1/1.5/S 500 75 x 75 42.5 54 162 N/A - 063322 UN 3H1/2.5/S 750 83 x 83 42.5 54 188 N/A - 063323 UN 3H1/2.5/S 1000 85 x 85 42.5 54 214 N/A - 063325 UN 3H1/5/S 2500 122 x 122 68.5 80 260 N/A - 063326 UN 3H1/5.5/S 4000 142 x 142 68.5 80 294 N/A - Black PP cap, with PE foam seal Blue PP cap, with sealing cone and tamper-evident ring Red PP cap, with PE foam seal and tamper-evident ring For Flask (ml) Thread Cat. No. € Cat. No. € Cat. No. € 50 28 - - - - 063371 N/A - 100 32 063483 N/A - 063302 N/A - 063333 N/A - 250 45 063484 N/A - 063315 N/A - 063335 N/A - 500/750/1000 54 063486 N/A - 063296 N/A - 063331 N/A - 1500/2500/4000 80 063485 N/A - 063301 N/A - - - HDPE square bottles with wide-mouth, UN Natural HDPE Square bottles with wide neck
Plasticware 804 High density polyethylene bottles, narrow neck Bottles Capacity (ml) 4 8 15 30 60 125 175 250 500 500 1000 Cap size (mm) 13 20 20 20 20 24 24 24 28 38-430 38-430 Units/bag 12 12 12 12 12 12 12 12 12 12 6 Units/box 72 72 72 72 72 72 72 72 48 48 24 HDPE Round bottle with narrow neck, PP cap Cat. No. 028760 028758 028759 028750 028751 028752 028753 028754 028755 028757 028756 €/box N/A - N/A - N/A - N/A - N/A - N/A - N/A - N/A - N/A - N/A - N/A - Amber HDPE round bottle, amber PP cap Cat. No. 028778 028776 028777 028441 028771 028772 - 028773 028774 - 028775 €/box N/A - N/A - N/A - N/A - N/A - N/A - - N/A - N/A - - N/A - NalgeneTM round bottles with narrow neck Capacity (ml) 60 125 250 500 1000 Cap size (mm) 20 24 24 28 38–430 HDPE narrow neck bottle, PP cap Cat. No. 028793 028794 028795 028796 028797 Units/box 72 72 72 48 24 €/box N/A - N/A - N/A - N/A - N/A - Cat. No. - 028816 028817 028818 028819 Units/box - 500 250 125 50 €/box - N/A - N/A - N/A - N/A - HDPE amber bottle with narrow neck, PP amber cap Cat. No. - 028800 - - 028803 Units/box - 72 - - 24 €/box - N/A - - - N/A - NalgeneTM economy bottles hSterile hIn HDPE hHDPE bottles with white cap hNarrow neck hExcellent chemical resistance hPackaging on module with shrink film hDouble packaging Nominal Capacity (ml) Total Capacity (ml) Weight (g) Cap Inn. Neck ø (mm) Total height (mm) Height without cap (mm) Out. ø (mm) bottle Cat. No. Units/ box €/ box Units/ bag/ 029975 8 12 6 20-415 13 44 42 25 98 980 N/A - 029976 15 18 7 20-415 13 58 56 25 112 896 N/A - 029977 30 34 8 20-415 13 61 58 36 54 864 N/A - 029978 60 69 9 20-415 13 84 81 38 45 540 N/A - 029979 125 143 16 24-415 18 102 99 51 24 240 N/A - 029980 250 289 26 24-415 18 132 130 61 30 180 N/A - 029981 500 555 40 28-415 20 170 168 74 20 120 N/A - 029982 1000 1090 78 38-430 28 216 213 91 12 24 N/A - NalgeneTMHDPE sterile bottles Find the UN approved bottles on dulis.nl WEB hHDPE Round bottle hPolypropylene cap hWaterproof hHDPE bottle hPolypropylene cap hNarrow neck hWaterproof
Plasticware 805 All prices are indicative and exclude VAT. Visit www.dulis.nl High density polyethylene bottles, narrow neck Bottles hIn translucent HDPE hPolypropylene screw caps hWaterproof hGood chemical resistance Azlon® HDPE bottles Narrow neck Vol. (ml) Units/ box Cat. No. Ø x H (mm) €/ box 30 10 232493 30 x 70 N/A - 60 10 232649 40 x 82 N/A - 100 10 232650 51 x 90 N/A - 125 10 232651 51 x 106 N/A - 150 10 232652 51 x 118 N/A - 250 10 232663 60 x 142 N/A - 500 10 232664 75 x 163 N/A - 1000 5 232665 90 x 203 N/A - 2000 5 232666 120 x 244 N/A - hIn HDPE hWaterproof polypropylene cap hFor storage and transport of liquids hUniform wall thickness hGood chemical resistance hNatural version for content visibility Cat. No. Volume Colour Neck Height (mm) Ø of the base (mm) Units/ box €/ box 135743 1 l Natural Thin 193.5 91 50 N/A - Round HDPE bottles hWaterproof hAnti-drip ring hDelivered with cap assembled Volume (ml) 4 8 15 30 60 125 250 500 1000 ø x H (mm) 16 x 38 25 x 43 25 x 56 32 x 69 39 x 84 50 x 101 61 x 129 72 x 171 91 x 210 Cap 13-425 20-410 20-410 20-410 20-410 24-410 24-410 28-410 38-430 Units/bag 12 12 12 12 12 12 12 12 6 Units/box 72 72 72 72 72 72 72 48 24 HDPE bottle Cat. No. 048320 048321 048322 048323 048324 048325 048326 048327 048328 €/bag N/A - N/A - N/A - N/A - N/A - N/A - N/A - N/A - N/A - Amber HDPE bottle Cat. No. 048329 048330 048331 048332 048333 048334 048335 048336 048337 €/bag N/A - N/A - N/A - N/A - N/A - N/A - N/A - N/A - N/A - Amber HDPE bottle Wheaton ® HDPE bottles, narrow neck hHigh density polyethylene hNeck diameter: 22 mm hTamper-proof cap with snap-on opening hSuitable when the bottles should not be opened after filling Cat. No. Volume (ml) Diameter (mm) Height (mm) Units/ box €/ box 391262 50 36 84 100 N/A - 391263 100 44 101 100 N/A - 391264 250 60 136 50 N/A - 391265 500 74 170 30 N/A - 391266 1000 90 222 20 N/A - HDPE bottles, narrow neck with white tamper-evident cap hMaterial: high density polyethylene hNeck diameter: 30 mm hTamper-proof cap with snap-on opening hSuitable when the bottles should not be opened after filling Cat. No. Volume (ml) Diameter (mm) Height (mm) Neck ø (mm) Units/ box €/ box 391436 250 60 137 30 50 N/A - 391437 500 74 177 30 30 N/A - 391438 1000 90 230 30 20 N/A - HDPE bottles with narrow neck and black tamper-evident cap
Plasticware 806 High density polyethylene bottles, narrow neck Bottles HDPE flasks with narrow neck , UN hNatural or Black hFlasks with narrow neck with UN approval hRecess for labelling 1000 and 2500 ml hThree types of caps are available hSupplied without cap, (to be ordered separately) Natural Black For bottle volume (ml) Body size (mm) Inn. neck Ø Out. Thread Ø (mm) H. without cap (mm) Weight (g) Approval Cat. No. € Cat. No. € 500 77 x 77 28.7 45 176.5 52 UN 1H1/X1.9/250 063380 N/A - 063451 N/A - 1000 96 x 96 28.7 45 211.8 92 UN 3H1/X1.9/250 063365 N/A - 063452 N/A - 2500 126 x 126 28.7 45 282 167 UN 3H1/X1.9/250 063366 N/A - 063384 N/A - Black HDPE caps for bottles with narrow cap, UN PP bell cap, with red PP tamper evident ring and PTFE cup PP bell cap, red, with degassing system and perforated PTFE cup For Flask (ml) Ø Thread (mm) Cat. No. € Cat. No. € 500 to 2500 45 063367 N/A - 063368 N/A - 063367 063368 Capacity (ml) 30 60 125 250 500 1000 h x side (mm) 63 x 38 83 x 41 110 x 54 116 x 61 146 x 74 181 x 95 Cap size (mm) 20 24 38–430 38–430 38–430 38–430 Cat. No. 028707 028708 028709 028710 028711 028712 Units/bag 12 12 12 12 12 6 €/bag N/A - N/A - N/A - N/A - N/A - N/A - NalgeneTM Square bottles with narrow neck hEasy to handle thanks to its lateral grooves hLabelable surface hSupplied without cap, (to be ordered separately) Cat. No. Volume (ml) Body size (mm) Inn. neck Ø (mm) Out. Thread Ø (mm) H. without cap (mm) € 063210 250 59 x 59 30.8 40 110.5 N/A - 063211 500 69 x 69 30.8 40 145.5 N/A - LDPE screw caps, natural colour Cat. No. For pot volume (ml) Internal Thread (mm) € 063235B 250/500 40 N/A - HDPE square bottles with narrow neck Caps for bottles with narrow neck Screw cap LDPE Dropper bottle Red dropper cap Thread Cat. No. €/unit Cat. No. €/unit Cat. No. € 18 - - 063281 N/A - 063297 N/A - 25 063232B N/A - 063280 N/A - 063297 N/A - hIn HDPE hWaterproof hEasy to handle thanks to its lateral grooves hLabelable surface hSupplied without cap, (to be ordered separately) hHDPE Square bottle hPolypropylene cap hWaterproof Cat. No. Vol. (ml) Body size (mm) Int. neck Ø (mm) Out. Thread Ø (mm) H. without cap (mm) € 063206 100 40.5 x 32 12.9 18 110.5 N/A - 063207 250 53.5 x 42.5 19 25 148 N/A - 063209 1000 84 x 66 19 25 222.5 N/A - HDPE Square flasks with grooves
Plasticware 807 All prices are indicative and exclude VAT. Visit www.dulis.nl High density polyethylene bottles, narrow neck Fluorinated high density polyethylene bottles, wide neck Fluorinated high density polyethylene bottles, narrow neck Bottles hRecess for labelling hSquare section hSupplied without cap, (to be ordered separately) h4 types of different caps Natural White Vol. (ml) Body size (mm) Int. neck Ø (mm) Out. Thread Ø (mm) H. without cap (mm) Cat. No. € Cat. No. € 100 45 x 45 17 32 108 063346 N/A - - - 250 60 x 60 17 32 136 063347 N/A - 063353 N/A - 500 74 x 74 17 32 170 063348 N/A - - - 1000 85 x 85 17 32 221 063349 N/A - - - hHDPE bottle hFluorinated polypropylene cap hWide neck Narrow-necked square bottles in HDPE Fluorinated HDPE botlle with wide neck, Fluorinated PP cap Capacity (ml) 125 250 500 1000 2000 Cap size (mm) 38 43 53 63 100 Units/bag 12 12 12 6 2 Cat. No. 029040A 029041A 029042A 029043A 029044A* €/bag N/A - N/A - N/A - N/A - N/A - * White cap NalgeneTM Fluorinated HDPE watertight bottles Fluorinated HDPE bottle with narrow neck, fluorinated PP cap Capacity (ml) 250 500 1000 2000 4000 10000 20000 Cap size (mm) 24 28 38 -40 38 -40 38 -40 83B 83B Units/bag 12 12 6 1 1 1 1 Cat. No. 029033 029034 029035 029036A 029037A 029038 029039 €/bag N/A - N/A - N/A - N/A - N/A - N/A - N/A - NalgeneTM Fluorinated HDPE watertight bottles Find the HDPE square bottles with narrow neck and blue cap on dulis.nl WEB hWith tamper-evident ring Cat. No. Description For Flask (ml) Thread Ø (mm) € 063345 Cap for narrow-necked bottles, blue with sealing cone 100 to 1000 32 N/A - HDPE Cap for bottles with narrow neck
Plasticware 808 Low density polyethylene bottles, wide neck Bottles Capacity (ml) 30 60 125 250 500 1000 Cap size (mm) 28 28 38 43 53 63 Units/bag 12 12 12 12 12 6 Units/box 72 72 72 72 48 24 Cat. No. 028400 028401 028402 028403 028736 028737 €/box N/A - N/A - N/A - N/A - N/A - N/A - NalgeneTM round bottles with wide neck hIdeal for liquids, pasty and granular products hWaterproof hBottles supplied with caps Cat. No. Volume (ml) Body Ø (mm) Inner neck Ø (mm) Thread Height (mm) € 063464 50 39 23.8 32 76 N/A - 063465 100 48 23.8 32 93.5 N/A - 063466 200 59 30.8 40 114 N/A - 063467 250 64 30.8 40 120 N/A - 063468 300 67.5 30.8 40 128 N/A - 063471 1000 95 50 65 205 N/A - LDPE cylindrical bottles, wide-mouth Find LDPE amber cylindrical bottles with wide neck on dulis.nl Find opaque LDPE bottles on dulis.nl WEB WEB hWaterproof hAnti-drip ring hDelivered with cap assembled hDouble-sealed cap Volume (ml) 30 125 250 ø x H (mm) 33 x 69 51 x 98 61 x 125 Cap 28-410 38-410 43-410 Units/bag 12 12 12 Units/box 72 72 72 Cat. No. 048347 048349 048350 €/bag N/A - N/A - N/A - Wheaton®LDPE bottles, wide neck hWith graduations hDurable and long-lasting hCertified for food contact hEasy to empty with either liquid or solid samples hNeck and thread according to DIN 13316 and 168 hLDPE Round bottle hPolypropylene cap hWide neck hWaterproof Vol. (ml) Grad. (ml) ø x h (mm) Neck ø (mm) DIN Units/ box Cat. No. €/ box 50 10 38 x 88 24 GL32 100 391267 N/A - 100 20 48 x 105 24 GL32 100 391268 N/A - 250 25 60 x 140 38 GL45 50 391269 N/A - 500 100 75 x 170 38 GL45 25 391270 N/A - 1000 100 95 x 206 55 GL63 17 391271 N/A - 2000 100 120 x 252 55 GL63 15 391272 N/A - Standardized polyethylene wide-necked vials Enter the Cat. No. to find our autoclaving procedure WEB
Plasticware 809 All prices are indicative and exclude VAT. Visit www.dulis.nl Low density polyethylene bottles, wide neck Low density polyethylene bottles, narrow neck Bottles hMaterials: polyethylene (body) and polypropylene (caps) hGraduations to assess the volume of content hperforated caps for fillings hRectangular bottles, ideal for storing samples in a minimum of space hSupplied with plug seal into which reserved notes can be inserted Cat. No. Volume (ml) Graduation (ml) Dimensions (mm) Neck ø (mm) Units/ box €/ box 391429 25 5 32 x 34 x 52 18 500 N/A - 391430 50 10 38 x 38 x 70 24 400 N/A - 391431 100 20 42 x 48 x 90 34.5 600 N/A - 391432 250 50 57 x 60 x 110 34.5 300 N/A - 391433 500 100 70 x 80 x 138 45 150 N/A - 391434 1000 100 80 x 103 x 176 58 80 N/A - 391435 2000 100 100 x 134 x 210 58 40 N/A - Rectangular polyethylene graduated bottles with wide neck Capacity (ml) 8 15 30 60 125 250 500 500 1000 Cap size (mm) 20 20 20 20 24 24 28 38-430 38-430 Units/bag 12 12 12 12 12 12 12 12 6 Units/box 72 72 72 72 72 72 48 48 24 Cat. No. 028768 028769 028761 028762 028763 028764 028765 - 028766 €/bag N/A - N/A - N/A - N/A - N/A - N/A - N/A - - N/A - NalgeneTM round bottles with narrow neck hWaterproof hAnti-drip ring hDelivered with cap assembled hLDPE bottle hPolypropylene cap hNarrow neck hWaterproof Volume (ml) 8 15 30 60 125 250 ø x H (mm) 25 x 43 25 x 56 32 x 69 39 x 84 50 x 101 61 x 129 Cap 20-410 20-410 20-410 20-410 24-410 24-410 Units/bag 12 12 12 12 12 12 Units/box 72 72 72 72 72 72 Cat. No. 048767 048768 048769 048770 048317 048318 €/bag N/A - N/A - N/A - N/A - N/A - N/A - Wheaton® LDPE bottles, narrow neck hSlender and tall shape hWaterproof hTo be completed with a cap, dropper or suction rod (to be ordered separately) Cat. No. Volume (ml) Body Ø (mm) Inn. neck Ø (mm) Thread Height (mm) € 063201 50 36.5 12.9 18 82 N/A - 063202 100 44.5 12.9 18 98.5 N/A - 063203 250 60 19 25 127.5 N/A - Screw caps, LDPE, natural colour For bottles with a volume of (ml) Thread Cat. No. € 250 25 063232B N/A - LDPE short neck bottles
Plasticware 810 Bottles Low density polyethylene bottles, narrow neck TPX bottles, wide neck Naturally contain trace amounts of metals. hCertified to contain less than 20 particles of 0.3 µm per ml hCertificate of analysis included in each box hWaterproof, non-sterile hDouble packaging in a class 10 laminar flow hood and in a class 100 clean room Vol. (ml) 125 029912 12 72 N/A - 500 029914 12 48 N/A - Cat. No. €/ box Units/ box Units/ bag NalgeneTM Low particulate LDPE bottles hMade of polyethylene hCompletely opaque hIdeal for photosensitive materials, either liquid or solid hSupplied with plug seals to ensure a perfect seal hPerforated sloping shoulders for lead-sealing and attaching labels Cat. No. Volume (ml) Diameter (mm) Height (mm) Neck ø (mm) Units/ box €/ box 391256 50 39 76.5 18.5 100 N/A - 391257 125 46 115 18.5 100 N/A - 391258 250 60 137 23 50 N/A - 391259 500 74 165 23 25 N/A - 391260 1000 93 213 34.5 20 N/A - 391261 2000 116 273 34.5 20 N/A - Bottles with narrow neck, dark grey Volume (ml) Cat. No. 030435 100 39 x 39 x 103 300 N/A - 030437 250 55 x 55 x 128 208 N/A - 030438 500 70 x 70 x 149 100 N/A - 030439 1000 89 x 89 x 184 60 N/A - €/ box Units/ box Dimensions (mm) Non-sterile. Corning® GosselinTM Polyethylene square bottles with arrow neck and red cap Capacity (ml) 250 500 1000 Cap size (mm) 43 53 63 Units/bag 12 12 6 Units/box 72 48 24 Cat. No. 028118 028152 028153 Units/box 24 16 16 €/box N/A - N/A - N/A - NalgeneTM round bottles with wide neck hPMP Round bottle hPolypropylene cap hWide neck hWaterproof hAutoclavable
Plasticware 811 All prices are indicative and exclude VAT. Visit www.dulis.nl Bottles FEP bottles, wide and narrow neck PFA bottles, wide neck PTFE bottles, wide neck PTFE bottles, narrow neck The most resistant to chemicals and corrosion FEP bottles are excellent for all high and low temperature applications. Recommended for storage and analysis of highly purified samples. Autoclavable Waterproof. FEP bottle with wide neck, ETFE cap Capacity (ml) 125 250 500 1000 Cap size (mm) 33 43 48 53 Units/bag 1 1 1 1 Cat. No. 028946A 028947A 028948A 028949A €/bag N/A - N/A - N/A - N/A - NalgeneTM Fluoropolymer bottles Enter the Cat.No. on dulis.nl to find our autoclaving procedure WEB FEP narrow neck bottle, ETFE cap Capacity (ml) 30 60 125 250 500 1000 2000 Cap size (mm) 20 20 24 24 28 38 38-430 Units/bag 1 1 1 1 1 1 1 Cat. No. 028937A 028938A 028939A 028940A 028941A 028942A 028943A €/bag N/A - N/A - N/A - N/A - N/A - N/A - N/A - The most resistant to chemicals and corrosion PFA bottles are excellent for all high and low temperature applications. Recommended for storage and analysis of highly purified samples. Autoclavable Waterproof. PFA narrow neck bottle, PFA cap Capacity (ml) 30 60 125 250 500 1000 Cap size (mm) 20 20 38–430 38–430 38–430 38–430 Units/bag 1 1 1 1 1 1 Cat. No. 028950A 028951A 028952A 028953A 028954A 028955A €/bag N/A - N/A - N/A - N/A - N/A - N/A - NalgeneTMFluoropolymer bottles hFDA approved hScrew cap hSuitable for low and high temperatures up to +280 °C hGrooves on the cap for a good grip hResistant to chemicals hInert Cat. No. Volume (ml) Ø neck (mm) ø x height (mm) € 098893 1 10 16 x 27 N/A - 098896 5 10 22 x 34 N/A - 098894 10 12 26 x 50 N/A - 098899 25 19 33 x 61 N/A - 098901 50 25 43 x 76 N/A - 098903 100 35 52 x 88 N/A - 098905 150 35 60 x 90 N/A - 098907 250 42 67 x 115 N/A - 098909 500 52 80 x 150 N/A - 098911 1000 57 100 x 185 N/A - 098913 2000 60 120 x 240 N/A - 098915 5000 80 170 x 335 N/A - PTFE bottles Inert and ideal for storing high purity chemical samples. hCertified to contain less than 20 particles of 0.3 µm per ml and certified for trace levels of metals hCertificate of analysis included in each box hWaterproof, non-sterile hDouble packaging in a class 10 laminar flow hood and in a class 100 clean room hAutoclavable Vol. (ml) 125 029916 1 6 N/A - 250 029917 1 4 N/A - 500 029918 1 4 N/A - 1000 029919 1 4 N/A - Cat. No. €/ box Units/ box Units/ bag PTFE Low particulate bottles
Plasticware 812 Bottles PVC bottles, wide neck Polycarbonate bottles, wide neck Polycarbonate bottles, narrow neck hTranslucent hWide neck for easy filling and cleaning hBlack screw cap with PE foam gasket, waterproof hTranslucent brown for light sensitive products hSupplied without cap (to be ordered separately, see below) Amber Translucent Vol. (ml) Body size (mm) Inn. neck Ø (mm) Out. Thread Ø (mm) H. without cap (mm) Cat. No. € Cat. No. € 50 38.5 x 38.5 23 32 60.5 063250 N/A - 063225 N/A - 100 46 x 46 31 40 71 063251 N/A - 063226 N/A - 300 67.5 x 67.5 41 50 94 063264 N/A - - - 500 80.5 x 80.5 54 65 108 063253 N/A - 063228 N/A - 750 91.5 x 91.5 69 80 120 063266 N/A - 063265 N/A - 1000 97 x 97 69 80 143 063254 N/A - 063229 N/A - 2000 122 x 122 69 80 187 063299 N/A - 063298 N/A - hBlack, with PE foam seal Cat. No. For pots with a volume of (ml) Thread € 063256 50 32 N/A - 063257 100 40 N/A - 063258 200 / 300 50 N/A - 063259 500 65 N/A - 063260 750/1000/1500/2000 80 N/A - 063261 2000 80 N/A - Caps for PVC square bottles PVC Square bottles with wide neck hIn polycarbonate hOptically transparent hBreakage resistant hAutoclavable (as well as the cap supplied) Cat. No. Volume (ml) Shape Thread Units/ box €/ box 360519 180 Round, wide neck 54 mm 12 N/A - 360518 400 Round, wide neck 63 mm 12 N/A - 360517 500 Round, wide neck 63 mm 12 N/A - 360516 1000 Round, wide neck 63 mm 12 N/A - Polycarbonate bottles hMade of highly transparent polycarbonate hSupplied with polypropylene cap without seal hStandard round shape, or convenient square shape hStrong and durable, autoclavable to +121 °C Cat. No. Volume (ml) Base Ø x H (mm) Neck Ø (mm) Units/ box €/ box 251575 250 59 x 139 28 24 N/A - 251576 500 73 x 172 28 12 N/A - 251577 1000 92 x 213 28 12 N/A - 251578 2000 115 x 266 40 6 N/A - Cat. No. Volume (ml) Dimensions (Ø x H)(mm) Neck Ø (mm) Units/ box €/ box 251579 500 81 x 175 28 12 N/A - 251580 1000 97 x 216 28 12 N/A - Square PC bottles Round PC bottles Azlon® polycarbonate bottles
Plasticware 813 All prices are indicative and exclude VAT. Visit www.dulis.nl Bottles Polycarbonate bottles, narrow neck hTransparent polycarbonate hPolypropylene cap h4 and 8 l models: shoulder attachment for integration of a marking label hAutoclavable Capacity Cat. No. Units/ box €/ bag Units/ bag Material Cap 029416 500 ml PC 38-430 4 24 N/A - 029418 1 litre PC 38-430 4 24 N/A - 029419 2 litres PC 38-430 1 1 N/A - 029420 2. litres PC 38-430 1 1 N/A - 029536 4 litres PC 38-430 1 1 N/A - 029417 8 litres PC 53B 1 1 N/A - NalgeneTM polycarbonate large round bottles with narrow neck Capacity (ml) 30 60 125 250 500 1000 2000 H x side (mm) 63 x 38 83 x 41 110 x 54 116 x 61 146 x 74 181 x 95 271 x 116 Cap size (mm) 20 24 38–430 38–430 38–430 38–430 53B Cat. No. 028694 028695 028696 028697 028121 028699 028013 Units/bag 12 12 6 6 4 4 1 €/bag N/A - N/A - N/A - N/A - N/A - N/A - N/A - NalgeneTMSquare bottles with narrow neck hIn polycarbonate hOptically transparent hBreakage resistant hAutoclavable (as well as the cap supplied) hPC square bottle hPP cap hWaterproof hTransparent hAutoclavable Cat. No. Volume (ml) Shape Thread Units/ box €/ box 360506 30 Octagonal 20/415 24 N/A - 360505 60 Octagonal 24/415 24 N/A - 360504 125 Octagonal 38/430 24 N/A - 360503 250 Octagonal 38/430 24 N/A - 360502 500 Octagonal 38/430 12 N/A - 360501 1000 Octagonal 38/430 12 N/A - 360500 2000 Octagonal 53B 6 N/A - 360509 300 Round 38/430 24 N/A - 360508 500 Round 38/430 12 N/A - 360507 1000 Round 38/430 12 N/A - Polycarbonate bottles hIn blue polycarbonate hGraduated hSterile hSuitable for storage temperatures from -85 °C to almost +100 °C hWith cap Cat. No. 088002 125 ml 38 26 52 x 52 x 102 50 N/A - 088007 1 l 38 37 98 x 98 x 194 35 N/A - 088010 2 l 48 37 116 x 116 x 262 20 N/A - 030093* 5 l 48 38 166 x 166 x 290 5 N/A - 088012 5 l 48 38 166 x 166 x 290 5 N/A - * with handle Bottle volume Cap ø (mm) Neck ø (mm) L x W x H bottle (mm) Units/ box €/ box NalgeneTMPolycarbonate Biotainer bottles Find the polycarbonate Biotainer bottles on dulis.nl WEB
Plasticware 814 hGraduated hWith natural HDPE double sealed caps hSterilised by gamma irradiation , SAL 10-6 hMade from 100% virgin resin, without animal compounds hEndotoxin-free and non-cytotoxic tested hPC: resistant from -130 °C to +135 °C, tested to be completely watertight in freezing conditions -80 °C hTraceability: each bottle has a unique serial number, batch number, expiry date and a barcode Sterile, capped medical grade bottles. Suitable for storage, transport and freezing of vaccines, biopharmaceuticals, culture media and biological solutions. Vol. Cap Ø (mm) Neck Ø (mm) Dimensions W x D x H (mm) Sale unit Cat. No. € sales unit 125 ml 48 37 58.8 x 58.2 x 95 100 unit box 351023 N/A - Bag of 5 351024 N/A - 500 ml 48 37 83.2 x 83.2 x 152 60 unit box 351025 N/A - Bag of 5 351026 N/A - 1 l 48 37 101 x 101 x 187 30 unit box 351027 N/A - Bag of 5 351028 N/A - 2 l 48 37 120 x 120 x 240 20 unit box 351030 N/A - Bag of 5 351031 N/A - 5 l 70 55 168 x 168 x 322 6 unit box 351032 N/A - Individual 351033 N/A - 10 l 70 55 212 x 212 x 395 2 unit box 351034 N/A - Individual 351035 N/A - 20 l 70 55 256 x 256 x 500 2 unit box 351036 N/A - Individual 351037 N/A - PharmatainersTM PC sterile square bottles Find all the accesories on www.dulis.nl WEB Bottles Polycarbonate bottles, narrow neck PET bottles, narrow neck hLightweight, durable hMoulded gradations hExcellent gas barrier hMade without animal-derived compounds hSterilised by gamma irradiation , SAL 10-6 hIn compliance with standard tests for biological products (including USP Class VI, UPS '661', European Pharmacopoeia for Abnor-mal Toxicity, Cytotoxicity, Hemolysis, and Non-pyrogenic) hCompatible with air shipments Cat. No. Volume (ml) Units/ box Neck 029557B 500 38-430 48 N/A - 029558B 1000 38-430 24 N/A - €/ box Cat. No. Material Volume (ml) Units/ box €/ box 030178B PET 125 96 N/A - 030179 PET 650 48 N/A - 030180 PET 1000 24 N/A - hSupplied with cap hPackaged in a film-covered tray in a critical environment protection area HDPE caps with seal ring hSuitable for PET and PETG bottles with 38-430 thread hGuaranteed leak-free when used with PET and PETG NalgeneTM bottles hMoulded with a seal ring hUnique design prevents the seal ring from breaking during the installation of the cap hFlat surface for labelling Cat. No. Description Units/ box €/ box 030184 HDPE cap with sealing ring 38-430 240 N/A - Pyrogenic Cytotoxic Hemo lytic PET bottles with natural HDPE caps PET bottles without cap hCap with sealing ring sold separately Sterile PET square bottles medium NalgeneTM
Plasticware 815 All prices are indicative and exclude VAT. Visit www.dulis.nl Bottles PET bottles, narrow neck hPET (polyethylene terephthalate), transparent like glass hGraduated in the mass h31.7 mm wide opening hUnbreakable, ergonomic hHDPE screw cap, leak proof, integrity indicator Flasks with unmounted caps (non-sterile) Bottles with mounted caps Bottles with pre-screwed caps Cat. No. Volume (ml) Dimensions H x W (mm) Units/ bag Units/ box €/ box 076808B 125 105 x 53 24 288 N/A - 076813B 250 132 x 63 24 144 N/A - 076822B 500 170 x 74 12 120 N/A - 076801B 1000 212 x 92.5 12 48 N/A - In a bag In a film-covered tray Vol. (ml) Dim. H x W (mm) Units/ bag Units/ box Cat. No. €/ box Cat. No. €/ box 125 105 x 53 24 336 688315 N/A - - - 500 170 x 74 12 120 - - 076825 N/A - Cat. No. Volume (ml) Dimensions H x W (mm) Units/ bag Units/ box €/ box 076806C 125 108 x 53 24 336 N/A - 076814C 250 135 x 63 24 144 N/A - 076821C 500 173 x 74 12 120 N/A - 076800B 1000 214 x 92.5 12 48 N/A - Fully screwed cap, integrity indicator before opening. Radiation sterilised vials, SAL 10-3. Pre-screwed cap: can be opened and filled, tamper evident after filling. Radiation sterilised vials, SAL 10-3. Corning® GosselinTM PET octagonal bottles Square bottles Octagonal bottles hTransparent PET hGraduated bottles and flasks hSterile Cat. No. Volume (ml) Graduation (ml) Range (ml) Units/ box €/ box 00431530 125 50–125 25 24 N/A - 00431531 250 50–250 25 24 N/A - 00431532 500 100–500 50 24 N/A - 00431533 1000 100–1000 50 24 N/A - Cat. No. Volume (ml) Graduation (ml) Range (ml) Units/ box €/ box 00431729 30 10–30 10 120 N/A - 00431730 60 10–60 10 96 N/A - 00431731 125 25–125 25 48 N/A - 00431732 250 50–250 50 48 N/A - 00431733 500 50–500 50 24 N/A - 00431734 1000 50–1000 50 24 N/A - hNeck Ø: 37 mm hPP Orange cap with GL45 seal hWhite HDPE screw cap 37.1 mm Ø Pyrogenic Corning® PET Square bottles and octagonal bottles hTransparent PET hSterile hMoulded gradations hInner Neck Ø: 31.7 mm hUnbreakable and ergonomic hNatural HDPE sealing cap hComplies with the requirements of the International Air Transport Association (IATA) Cat. No. Volume (ml) Graduation (ml) Range (ml) Units/ box €/ box 432331 125 25–125 25 48 N/A - 432332 250 50–250 50 48 N/A - 432333 500 50–500 50 24 N/A - 432334 1000 50–1000 50 24 N/A - Pyrogenic Cytotoxic PET bottles, IATA-compliant Screw cap with inner lip, tamper-evident
flippingbook.comRkJQdWJsaXNoZXIy MTUwNzIy