Om veiligheidsredenen wordt u na 4 minuten uitgelogd Deze video is verborgen om je cookievoorkeuren van derden te respecteren. Geef toestemming voor YouTube-cookies bij het bekijken van video's waarin onze producten of diensten worden gepresenteerd.
0
Onmogelijk toe te voegen. Uw mandje bevat een vergrendelde offerte en moet worden voltooid voordat u andere items kunt bestellen. Toevoegen aan het winkelmandje... Artikel tegevoegd aan het winkelmandje

Electrophoresis products and reagents

EMBITEC landscape gel

Ontdekken
• 1% Agarose TAE with GelGreen (alternative solution to BET) landscape gel
• Fragments optimal separation: 600 to 10000 bp
• 6 mm gel thickness
• Utilisable avec la cuve RunOne
• Convenient: place gel with tray directly onto electorforesis platform
• Safe: no UV light necessary for viewing gels with GelGreen. Simple waste treatment procedure (elimination with organic waste)

Agarose Basic

Ontdekken
• For the separation of DNA and RNA fragments and may be used at concentrations between 0.8 and 2 %

Agarose Condalab for Molecular Biology

Ontdekken
Specific products for molecular biology:
• Standard agarose used in electrophoresis techniques;
• High Resolution Agarose;
• Agarose with a low melting point for DNA recovery;
• Dehydrated media for molecular biology;
• Acrylamides in solution and buffers.
• DNAs and RNAs free

Ethidium bromide dropper bottle

Ontdekken
For easy and safe addition of ethidium bromide in solutions. Add one drop per 50 ml of solution to obtain a concentration of 0.5 µg / ml. Bottle is waterproof and provides protection against UV.

Instastain® ethidium bromide staining card

Ontdekken
• Quick and easy
• No pipetting required, delivers a small amount of stain to the agarose
gel via a special paper backing
• Place the card on the gel and wait: 8-10 min. for 1% agarose gels and 3-5 min. for 0.8% agarose gels
• Each card will stain a gel up to 7 x 7 cm in size

ClearLine® EmeralDye Stain

Ontdekken
High sensitivity even for small fragments, superior signal to noise ratio, can be used in a classical gel staining procedure as well as in post staining procedures, 4 - 6 µl in 100 ml of agarose.

DNA-dye NonTox

Ontdekken
• Non-hazardous, non-mutagenic and non-toxic alternative to ethidium bromide
• Ready-to-use 6X charge buffer for direct mixing with samples
• Contains 3 migration dyes: bromophenol blue, xylene cyanol and orange G
• Excitable by UV and blue light
• Excitation/emission spectrum: 495 (pic 1), 260 (pic 2) nm / 540 nm

Gel Green nucleic acid gel stain

Ontdekken
• For staining nucleic acids
• Alternative non mutagenic non cytotoxic and no ethidium bromide
• More sensitive than ethidium bromide and SYBR Green
• Extremely stable: long-term storage at room temperature and can be microwaved
• Dye to be added during the preparation of the gel or staining afterwards
• Easy to use
• Main excitation wavelength 505 nm / secondary 270 nm
• Emission wavelength 530 nm

SmartGlow stain

Ontdekken
• Direct replacement for Ethidium Bromide
• Excitation with both UV (290 nm) and Blue Light (490 nm)
• Store at 4 °C
• Better sensitivity than EtBr

Tween® 20

Ontdekken
Blocking agent. Nonionic detergent used in solutions.

Biosolve TAE buffer concentrate

Ontdekken
The buffer TAE (Tris-Acetate-EDTA) is used in agarose gel electrophoresis for applications requiring high resolution and separation under a low voltage for high molecular weight double stranded DNA. The solutions are aseptically microfiltered.

Buffer sachet

Ontdekken
• Dissolve in pure water to the indicated final concentration
• Makes 10L of 1 X solution: 1 x contains: 89 mm Tris, 89 mm borate, 2 mm EDTA, pH 8.2 -8.4

PCR grade prealiquoted water

Ontdekken
• Ultrapure, sterile, deionized, double destiled and prealiquoted water
• Assayed for absence of contaminating DNA from bacterial, fungi and human sources
• DNase free

PCR tested water, RNase- and DNase-free

Ontdekken
• Bacterial DNA: not detectable (min. 40 PCR cycles)
• DNases/RNases: not detectable
• In 1.7 ml tubes

Sterile, bi-distilled, non-pyrogenic water

Ontdekken
• OTEC range
- Directives and standards
Aguettant OTEC water is an Active Pharmaceutical Ingredient (API) (Used as a pharmaceutical primary material excluding injectable, ophtalmic or inhaled products). Complies with directives NF EN ISO 3696 type 3 and European pharmacopeia's monograph «purified water in container ».
Monograph « sterile purified water » American pharmacopeia (excluding non-sterile 10 litres container)
- Uses
For rinsing and irrigation of materials and tools, white rooms cleaning, machine washing , and acting as an active substance for the manufacture of medicaments..
OTEC range cannot cannot be used neither in the hospital sector, nor for rinsing and irrigation of wounds.

• VERSOL range
- Diectives and standards
VERSOL sterile non pyrogenic water complies with P.P.I and the current European pharmacopeia's monographs. In compliance with DM IIa (sterile), ISO 9001 and NF EN ISO 13485 certifications.
- Ues
These flasks are used for rising and irrigation of wounds; they are sterile and of single use. Must not be used for injections.
- Documents provided upon request (bulletin d'analyses)

Pure water

Ontdekken
• Pyrogenic
• Purified water, reverse osmosis, demineralised
• Resistivity > 0.5 MΩ. cm
• Compliant with current European Pharmacopoeia - Monograph Purified water packaged in container
• Compliant with current US Pharmacopeia - Purified water monograph
• Complies with NF ISO3696 standard type 3
• Bacteriological quality < 10UFC/100 ml
• Analysis Bulletin on request
• Applications:rinsing the medico-surgical during disinfection protocols that do not require sterile water, final rinsing of laboratory instruments, cleaning in clean room, solutions preparation for PLC, buffer solutions realisation

Sterile sodium chloride Miniversol

Ontdekken
Composition: NACl 0.9 % non-apyrogenic.

Packaging: the Miniversol 0.9 % sterile sodium chloride for rinsing and irrigation is sold in volumes from 45 ml to 1 L. The batch number and expiry date are indicated on the flask labels. Guaranteed for more than one year.

Directions and recommended uses: physiological solution for rinsing, irrigation of the skin, wounds and surgical cavities and general laboratory use. Use as primary material for the manufacture of non-injectable medicines, culture media etc.

Documents provided on request: conformity assessment to the applied European Pharmacopeia's monograph ''purified water packaged in can'' and to the ISO 3696 type 3 norm.

DNA dye for DNAzure blue gel

Ontdekken
• Dye visible to the naked eye after 5 to 30 minutes of exposure to light
• Ultrasensitive, band visualization up to 1 ng of DNA
• Excision of the bands of interest without the use of a UV lamp
• Dye compatible with subsequent use of DNA for sequencing and cloning
• The use of bromophenol blue (found in some loading buffers) is not recommended, it is preferable to use G
• Picture taking possible without imager