Om veiligheidsredenen wordt u na 4 minuten uitgelogdDeze video is verborgen om je cookievoorkeuren van derden te respecteren.Geef toestemming voor YouTube-cookies bij het bekijken van video's waarin onze producten of diensten worden gepresenteerd.
Onmogelijk toe te voegen.Uw mandje bevat een vergrendelde offerte en moet worden voltooid voordat u andere items kunt bestellen.Toevoegen aan het winkelmandje...Artikel tegevoegd aan het winkelmandje
Rack for the vertical storage of 8 x 15 ml tubes and 4 x 50 ml tubes, or the horizontal storage of flat bottom tubes on 2 levels. The lower level can be observed from the translucent upper level.
• Material: polypropylene • For tubes with a diameter of 16, 18 or 20 mm • Contents of tube visible • Autoclavable rack • Can be used in a water-bath • Specially intended for titration work
• ''Free hands'' support for the user • Two models: white (the tube can be removed with one hand) and blue (self-gripping rack, the tube is fixed in the rack; both hands must be used to remove it)
• Made from polypropylene • For all tube diameters • Blue rack that can be dismantled • Different colour trays depending on the size • Dimensions (L x w x h) : 146 x 146 x 70 mm
• Autoclavable polypropylene • Linkable, stackable • 25 spaces (5 x 5), with numeric index • Dimensions: 122 x 116 x 52 mm • For tubes with diameter from 8 mm to 17 mm • Resistant to temperatures between -80 °C and + 121 °C
• 3 models for tubes of 13, 16 or 30 mm • Made from a highly resistant acetal based polymer • Autoclavable from 20 °C to 120 °C • L x w x h: 293 x 115 x 65 mm
• Made from polyoxymethylene • Interchangeable grid • For tubes with a diameter of 10 to 30 mm • Large rack: more compact and less expensive than many small racks • Autoclavable • Rubber feet for greater stability • Grids on 3 levels for better tube support • Dimensions of the racks L x w x h (mm): 318 x 111 x 67
• Made from polypropylene • For tubes of ø 13, 16, 20, 25 and 30 mm • Supplied flat • Stackable • Marking area on the two lengths • Autoclavable • Alphanumeric referencing on the tray • 4 colours available: white, blue, yellow, red
Rack can be tilted at 2 angles: • 5 degrees for large culture area (ideal for aerobic cultures); • 20 degrees for smaller area (for anaerobic cultures).
• For tubes with a diameter of 7 to 30 mm • Made from polypropylene • Can be used from - 45 °C to 60 °C • Supplied in flat packaging to facilitate storage • Ready to assemble • Adjustable height can be adapted to most tubes • Alphanumeric labelling
• 2 rotating racks attached • Alphanumeric labelling on the racks • Autoclavable • 2 x 48 holes of 1.5 ml • 1 x 96 holes of 0.2 ml • 1 x 48 holes of 0.5 ml • Blue and purple • L x w x h (mm): 296 x 118 x 34
• Made from polystyrene • For 48 microtubes with a diameter of 11 mm (1.5 / 2 ml) • Stackable racks • Height dimensions (l x w): 182 x 122 mm • Total dimensions (L x w x h): 192 x 122 x 47 mm • 5 different colours: yellow, white, red, purple and green
For opening microtubes with a screw cap with just one hand!
Skirted microtubes can be perfectly inserted into the base of the rack and will be supported. Other types of microtube are held in the upper part of the rack by claws that grip microtubes with a grooved neck.
• For tubes from 1.5 to 15 ml • Autoclavable at 121 °C • The last tray slides onto the support rod and makes it possible to adjust the height so that the tube is properly immersed
Polycarbonate storage boxes: three models for microtubes of 0.2 ml, 0.5 or 1.5 ml. Capacity of 64 microtubes for the 0.2 ml and 1.5 ml models, and 81 tubes for the 0.5 ml models.
• Safely store vials from -196 to +121 °C • Made from polycarbonate • With drainage holes • Stackable and autoclavable
Model A: • for 25 vials of 1.2 to 2 ml (5 x 5); • friction fit, slide-on lid.
Model B: • for 81 vials of 1.2 to 2 ml (9 x 9); • Assorted colours: red, purple, blue, green; • with array, makes sample retrieval simple; • hinged lid with built-in stop; • includes forceps.
Model C: • for 81 vials of 3 to 5 ml (9 x 9); • with array, makes sample retrieval simple; • hinged lid with built-in stop.
Model D: • for 100 vials (10 x 10), works best with internally-threaded vials; • hinged lid with built-in stop; • includes forceps.
• Modular rack with different independent, articulated and movable inserts to accommodate different types of tubes • Inserts can be rotated for better access to samples • Ergonomic handles • Alphanumeric marker • Autoclavable • One base supplied with 2 inserts for 20 tubes of diameter 10-13 mm, 2 inserts for 20 tubes of diameter 13-17 mm, and 2 inserts for 6 tubes of diameter 25-30 mm • Dimensions L x W x H: 309 x 107 x 77 mm
• Polypropylene • Organize and protect thin-walled NMR tubes • Holds up to 72 tubes in a 6 x 12 matrice • Stackable • Chemical resistant • Autoclavable
• Polystyrene • For 5 ml tubes with snap or screw cap • For Temperatures ranging from - 90 ° C to + 80 ° C • Transparent lid for better visibility of the tubes • Grid numbered from 1 to 25 on the lid • 2 cut corners on the lid and base to prevent misalignment • Ventilation event minimizing condensation • Drainage hole under the base • Stackable
• Polypropylene • Autoclavable at 121 °C • With retaining tabs to reduce the risk of spillage • Ideal for water bath work • Reduce the risk of spills • Stackable, alphanumerically identified wells • Rack Dimensions (L x W x W): 14,8 x 10.5 x 7 cm
• Made of polypropylene • For tubes 13 to 17 mm • 4 sides: 12 tubes of 13 mm / 18 tubes of 13 mm / 12 x 17 mm tubes / 18 tubes of 17 mm • Connectable face to face or end to end • Can be used in water bath or freezer • Alphanumeric marking • Dimensions (mm): 232 x 70 x 95 • Autoclavable