Om veiligheidsredenen wordt u na 4 minuten uitgelogd

Onmogelijk toe te voegen.

Uw mandje bevat een vergrendelde offerte en moet worden voltooid voordat u andere items kunt bestellen.

Toevoegen aan het winkelmandje...

Artikel tegevoegd aan het winkelmandje

Plasticware Tubing and accessories Accessories

Accessories

Assortment of connectors

Assortment of 76 autoclavable polypropylene connectors of all types, stored in a transparent polystyrene box. Includes:
• 10 straight connectors with same diameter on each side (ø: 3.2; 4.8; 6.4; 9.5; 12.7 mm);
• 12 straight connectors with different diameter on each side (ø: 4.8 - 6.4; 4.8 - 9.5; 4.8 - 12.7; 6.4 - 9.5; 6.4 - 12.7; 9.5 - 12.7 mm);
• 12 ''T'' connectors and 12 ''Y'' connectors (ø: 3.2, 4.8, 6.4, 7.9, 9.5, 12.7 mm);
• 6 Quick Disconnect connectors (3.2 - 6.4; 6.4 - 9.5; 9.5 -12/7 mm);
• 24 Stopper caps size 0 to 10 (height: 25 mm).

Connection kit 28 pieces

28 piece connection kit containing:
• 5 straight connectors;
• 4 straight connectors;
• 8 ''Y'' connectors;
• 4 ''T'' connectors;
• 5 fast connection connectors;
• 2 clamps to control the flow.

Luer-to-Tubing Coupler Assortment Kit

Assemble luer fittings for use with flexible tubing with internal diameters of 1.6 mm, 2.4 mm, and 3.2 mm.

LiquiMobil SAN Flowmeter

• Visual indication of the flow rate for liquids or gases
• For pipes with an int. diameter of 6 to 11 mm
• Resists at a maximum pressure of 2 bar
• Dimensions: 88 x 40 x 15 mm
• >>Max. working temperature 30 °C

Luer Valve Assortment Kit

Contain a vaste range of valves and connectors for building your own liquid flow experiment.

LiquiMobil SAN Flowmeter

• Visual indication of the flow rate for liquids or gases
• For pipes with an int. diameter of 6 to 11 mm
• Resists at a maximum pressure of 2 bar
• Dimensions: 88 x 40 x 15 mm
• >>Max. working temperature 30 °C

Rapid connection connectors

Polyethylene.

Polypropylene connectors

Autoclavable polypropylene connectors for tubing. Straight, T or Y shapes. The models with conical ends provide better tolerance to variations in the internal pipe diameter.

Threaded adapter 1/4''- 28 for multi-channel caps Q

- - -

Luer fitting connectors

• To connect pipes with Luer connection
• Made of polypropylene

Straight fitting connectors

• To connect two pipes of the same diameter
• Made of polypropylene

Couplings with thumb latch

• To connect pipes of the same or of different diameters
• Exist in version with shut-off valve to cut the liquid flow if disconnected
• Pressure: up to 8.3 bar
• Valve spring: 316 stainless steel
• External springs and pin: stainless steel
• PMC and PMC 12 couplings are intercompatible
• PLC and PLC 12 couplings are intercompatible

PMC/PLC series couplings, suited for general-purpose applications:
• Temperature range: -40 to 82 °C
• Main components and valves: Acetal
• Thumb latch: stainless steel
• O-rings: Buna-N
• Colour: natural white
• Nominal diameter: PMC: 3.2 mm / PLC: 6.4 mm

PMC12/PLC12 series couplings, suited for greater chemical resistance (more demanding applications):
• Temperature range: 0 to 71 °C
• Main components and valves: polypropylene
• Thumb latch: stainless steel
• O-rings: EPDM
• Colour: almond
• Gamma sterilisable <= 50 kGy
• Nominal diameter: PMC12: 3.2 mm / PLC12: 6.4 mm

APC series couplings, without exposed metal parts:
• Temperature range: -40 to 180 °C
• Main components and valves: Acetal
• Thumb latch: acetal
• O-rings: Buna-N
• Colour: natural white / grey latch
• Nominal diameter: 6.4 mm

3 mm diameter micro columns

• Pressure up to 1200 Psi/82 bar
• 4 FF: 2 fixed extremities

Accessories for different column sizes

- - -

Adaptors

• Autoclavable
• Made from Tefzel/inert PTFE
• Chemically inert
• The cap adaptors replace the capsule and seal in the form of small calibrated connectors. Simply screw the adaptor onto the connector or valve in place of the cap and elastomer seal

PTFE cone

Replace the original seals for a completely PTFE connection.

Joints for connectors

- - -

Female connectors

• Instant connection without flange, no dead volume
• Inert Teflon joint,
• No tool necessary
• Fixed pressure at 1000 psi (68 bar)

Bore connectors

• Inert fittings for external pipe connection
• Do not have dead volume
• Supplied with PTFE body, 1.5 mm PTFE cone, O-
• Small connectors with PTFE cone 0.8 mm and ETFE cap, large connectors with 4.7 mm PTFE cone
• Autoclavable (Except connector caps)

Manual valves

• Variable connectors with valves
• Instant connection of the pipe
• Chemically inert
• Colour coded caps for identification
• Fixed pressure 50 psi (3 bar / 500 psi 33 bar)
• On-off operation
• The standard diameters are supplied with fluoroelastomer Viton® O-ring joints
• The small diameters are supplied with 0.8 mm cones

Multi-channel caps

• Q series multi-channel caps
• For liquid transfer (pressure applications)
• Anti-torsion
• PTFE body
• Pipes connected by 1/4''-28 stainless steel threaded orifices and nuts
• Recommended ferrules: Omni-Lok™ or Gripper system
• Supplied with a set of pipes.

T-Series Bottle Caps:
• For liquid transfer Luer ports combined with straight-through tubing connections
• 32 mm outer diameter for semi-rigid tubing
• Solid PTFE inner body
• Anti-twist design
• Optional check valve and filter

Conical cap with two pipes

• Polypropylene
• Perfect impermeability
• With two pipes

Quick-filling / venting closures

• Made of polypropylene, with TPE seal
• 83B closure
• Features a quick-disconnect fitting with tubulation for attachment to tubing of your choice, fittings have tubulation both in and outside of the closure
• Available in two- or three-port styles for 1/4" (6.35 mm) or 3/8" (9.53 mm) tubing

Sterile septum cap for PET bottle

• Silicone caps with PTFE in contact with the liquid surface
• Combine the elasticity of silicone for the seal with the non-reactivity of PTFE surfaces
• Without adhesive
• The two materials used offer a better barrier to gases than silicone
Sterile, non-cytotoxic, non-pyrogenic
• For PET or PETG media bottles

Pouring cap

• Polypropylene with polyethylene insert
• For all bottles of 1 litre, 2 litres, 4 litres with neck 38-430 (38 mm)

HDPE caps

High density polyethylene caps for PET or PETG media bottles. SAL 10^-6, non-cytotoxic, non-haemolytic, non-pyrogenic.

Caps Top Work

• Polypropylene caps
• With two or three ports, equipped with flexible silicone pipes
• The pipes are welded by fusion to form a closing system from one piece
• For transferring liquids in an aseptic manner
• Autoclavable
• Watertight

Caps for aseptic transfer

Caps with pipe for filling and emptying Nalgene carboys in aseptic conditions.

Spare tap

Spare tap for Nalgene carboys. Accepts pipes with an internal diameter of 16 mm (5/8). An adaptor (included) enables you to also attach pipes with an internal diameter of 6 to 13 mm.

Polyethylene taps

Taps with 2 or 3 channels. The polyethylene displays excellent chemical resistance. The PDVF is autoclavable and can withstand temperatures up to 204 °C. Maximum pressure: 34.3 kPa (5 psi).

Polypropylene taps

• Material: polypropylene and high density polyethylene
• For liquids and gas at low pressure (throughput pressure 0.5 bar) or low vacuum
• Body and key can be handled easily and without lubricants
• With rectilinear flow passage

PP/TFE taps and connectors Nalgene

• Polypropylene
• TFE plug

Clamps for pipes KECK

• Precise control of liquid flow using just one finger
• Thermoplastic polyester (PBT)
• Resistant to temperatures of 200 °C
• Autoclavable

Manual distribution valve

• For easy control of the flow rate
• The valve is to be inserted into a flexible pipe (can be used at low pressure only); flow rate is easily controlled by pinching it
• Intended for distribution bottles
• Three connections for pipes with an internal diameter of 1/4" to 7/16"
• Materials of Pinch Valve: PTFE, stainless steel and polypropylene for maximum chemical resistance
• Autoclavable at 121 °C

Tube clip

• Mohr or Hoffmann type
• Nickel-plated brass

Presse-tube

Stainless steel

Pipe collar

Stainless steel ring

Pipe clamp Wilo

- - -

Tube clamp

- - -

Clamp for laboratory pipes

• Ideal forceps for use with laboratory pipes
• Made from plastic that is not sensitive to rust, corrosion or deformations
• Moulded from one single piece, without sharp edge
• Autoclavable
• Enables precise and practical regulation of fluid flow from a completely open position to restricted flow and then a completely closed position
• For pipes with an external diameter of 1/4 to 7/16 (inches)

PTFE tape

• PTFE
• To protect threads and resolve leaks
• White colour
• L x w: 12 mm x 12 m

Stainless Steel Filling Countersunk for pipe

• To connect to the end of the pipe to keep it immersed
• 304 stainless steel, autoclavable

Stainless Steel Tube Filling Nozzle

• 304 stainless steel tip, autoclavable
• To be connected to the end of the pipe to dispense the liquid

Aseptic transfer cap

• Rigid polypropylene inner tube adapted to reach the bottom of the bottle
• 2 outputs:
- output with 50 mm PVDF filter 0.2 µm
- output MPC male connector
• Double packaging for GMP applications
• Free of animal components
• Sterile SAL 10^-6
• BSE / TSE compliant

Pipe-Cutter

• Cuts pipes up to 20 mm in external diameter straight and cleanly
• Suitable for any wall thickness

Pipe clamp collars

• Allows pipes to be securely fastened